LD216-251 Télécommande

Remote Control Overview

Remote Control

Number	Description
1	Power On/Off
2	Back to Home Screen
3	Input source selection
4	Change to HDMI 1/2 input source
5	Switch to a blank, black screen
6	Adjust the brightness level
7	Directional buttons
8	Confirm the selection
9	Enter the Information page
10	Enter the Settings menu
11	Return to previous
12	Play/Pause content
13	Move content forwards/backwards
14	Increase/decrease the volume level
15	Numeric input buttons
16	Input key for a dot (.)
17	Delete key for text input
18	Mute/Unmute

Plage du récepteur de la télécommande

La portée de fonctionnement de la télécommande est indiquée ici. Elle fonctionne jusqu’à une distance de 20 pieds (6 mètres), à un angle de 30° à gauche et à droite. Assurez-vous que rien ne bloque le signal de la télécommande vers le récepteur.

Inserting Remote Control Batteries

The remote control is powered by two 1.5v "AAA" batteries.

To insert batteries into the remote control:

1. Remove the cover on the rear of the remote control.
2. Insert two “AAA” batteries, ensuring the “+” symbol on the battery matches the “+” on the battery post.
3. Replace the cover by aligning it with the slot on the remote control and snapping the latch shut.

Warning: There is a risk of explosion if batteries are installed with incorrect polarity.

NOTE:

• It is recommended that you do not mix battery types.
• Avoid exposure to heat or steam.
• Do not allow water or other liquids to splash on the remote control. If the remote control becomes wet, wipe it dry immediately.
• Always dispose of old batteries in an environmentally friendly way. Contact your local government for more information on how to dispose of batteries safely.