• Print Print

VController Using the Application

From ViewSonic Documentation
Revision as of 03:59, 16 June 2022 by AL (talk | contribs) (Created page with "<noinclude> {{Sticky_Menu_Projector_Software |1=vController_Initial_Setup |2=vController_Using_the_Application |3=vController_Advanced_Features |4=vController_Appendix }} </no...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
VController Using the Application
Initial Setup
Using the Application
Start Up
Setting
[[{{{5}}}|Schedule]]
[[{{{6}}}|Command Mode]]
Customer Service

User Interface

vController 2.0 integrates RS232 and LAN command for monitors and projectors.

  • Start Up
  • Setting
  • Schedule

    • Start Up

    Select Drive

    Press the Monitor Icon Monitor Icon to control the monitor or the Projector Icon Projector Icon to control the projector.
    Projector Icon

    RS232 settings

    1. Press the Return Button Return Icon to search for the RS232 connection ports and then select a corresponding hardware connection port.
      • Default baud rate is 9600.
    2. Press the Share Button Share Icon to connect to the RS232. When the RS232 has been successfully connected, the button will turn green.

    Projector Icon

    Retrieved from "https://manuals.viewsonic.com/index.php?title=VController_Using_the_Application&oldid=19406"