XG2409A

Introduction

Package Contents

1. Monitor
2. Power Adapter
3. Video Cable
4. Quick Start Guide

Note: The cables included in your package may vary depending on your country. Please contact your local reseller for more information.

Product Overview

• 
  Front View
• 
  Rear View

Number	Description
1	Control Panel Keys
2	Power Button
3	I/O Ports
4	Security Lock Slot

I/O Ports

Number	Description
1	DC IN
2	HDMI
3	DisplayPort
4	Audio Out

Note: For more information about the Control Panel Keys, refer to Using the Control Panel Keys.

Initial Setup

Installing the Stand

Note: Place the monitor on a flat, stable surface to ensure safety and optimal performance.

Removing the Stand

Important: Before removing the stand, turn off the monitor, disconnect all cables, and place the monitor on a flat, stable surface with the screen facing down.

Mounting the Monitor

After removing the stand, the monitor can be mounted using an optional mounting kit or bracket.

Note: For use only with a UL certified mounting kit. To obtain a mounting kit or height adjustment base, contact ViewSonic® or your local dealer.

Refer to the table below for the standard dimensions for mounting kits.

Maximum Loading	Pad Hole	Screw Specification	Screw Quantity
14 kg	100 x 100 mm	M4 x 10 mm	4 screws

1. Attach the mounting bracket to the VESA mounting holes at the rear of the monitor, securing it with four M4 x 10 mm screws.
2. Follow the mounting kit instructions to mount the monitor.

Using the Security Slot

To help prevent the monitor from being stolen, use a security slot locking device to secure the monitor to a fixed object.

Additionally, fastening the monitor to a wall or fixed object using a security cable can help support the weight of the monitor in order to prevent the monitor from falling over.

Making Connections

Connecting to Power

1. Connect the power adapter to the DC IN jack at the rear of the monitor.
2. Plug the power adapter into a power outlet.

Connecting to Audio and Video

Using the Monitor

Adjusting the Viewing Angle

Height Adjustment

Lower or raise the monitor (0 to 130 mm).

Note: When adjusting, hold the monitor firmly on both sides and press down along the adjustment track.

Screen Orientation Adjustment (Monitor Pivot)

1. Raise the monitor to its maximum height and then tilt it back fully.
2. Rotate the monitor 90° clockwise or counterclockwise from landscape to portrait orientation.
Note:

• When adjusting, hold the monitor firmly on both sides.
• To rotate the screen image, manually change the system’s display orientation settings.

Swivel Angle Adjustment

Turn the monitor to the left or right (± 45˚).

Tilt Angle Adjustment

Tilt the monitor forwards or backwards (-5˚ to 22˚).

Note: Adjust the monitor by supporting the stand with one hand and gently tilting the screen with the other.

Turning the Monitor On/Off

Note:

1. Plug the connected power adapter into a power outlet.
2. Press the Power ( ) button to turn on the monitor.
3. To turn the monitor off, press the Power ( ) button again.
Note:

• The monitor will still consume power as long as the power cord is plugged in. If the monitor is not being used for extended periods, please unplug the power cord from the power outlet.
• If the OSD Menu is still on screen, press and hold the Power ( ) button for three seconds to turn the monitor off.

Using the Control Panel Keys

Activate Hot Keys, navigate the On-Screen Display (OSD) Menu, and change settings.

Quick Menu

Press the 1 (★) key to activate the Quick Menu

Note: Follow the key guide that appears on the screen to select the option or make adjustments.

Icon	Menu	Description
	ViewMode	Select one of the preset color settings.
	Volume	Adjust the level, or mute the volume.
	Contrast/Brightness	Adjust the contrast or brightness level.
	Input Select	Select the input source.
	Exit	Exit the Quick Menu.