• Print Print

LS901HD LS901-4K Mounting the Projector: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older editNewer edit →
VY (talk | contribs)
7,615 edits
No edit summary
Marked this version for translation
Line 1: Line 1:
==Mounting the Projector==
==Mounting the Projector==
{{Note|<translate>If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate.</translate>}}
{{Note|<translate><!--T:1--> If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate.</translate>}}


<ol>
<ol>
     <li> <translate>To make sure the most secure installation, please use a ViewSonic® wall or ceiling mount.</translate>
     <li> <translate><!--T:2--> To make sure the most secure installation, please use a ViewSonic® wall or ceiling mount.</translate>
     </li>
     </li>
     <li><translate>Make sure the screws used to attach the mount to the projector meet the following specifications:</translate>
     <li><translate><!--T:3--> Make sure the screws used to attach the mount to the projector meet the following specifications:</translate>
         <ul>  
         <ul>  
             <li><translate>Screw type: M4 x 10</translate></li>
             <li><translate><!--T:4--> Screw type: M4 x 10</translate></li>
             <li><translate>Maximum Screw Length: 10 mm</translate>
             <li><translate><!--T:5--> Maximum Screw Length: 10 mm</translate>
                 <div class="res-img">[[File:LS901HD_Mount.png|400px| <translate>Mounting points</translate> | alt= <translate>Mounting points</translate>]]</div>
                 <div class="res-img">[[File:LS901HD_Mount.png|400px| <translate><!--T:6--> Mounting points</translate> | alt= <translate><!--T:7--> Mounting points</translate>]]</div>
             </li>
             </li>
         </ul>
         </ul>
Line 16: Line 16:
</ol>
</ol>


{{Note-yellow|<translate>'''CAUTION'''
{{Note-yellow|<translate><!--T:8-->
'''CAUTION'''
:* Avoid installing the projector near a heat source or air conditioner.
:* Avoid installing the projector near a heat source or air conditioner.
:* Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of the projector.</translate>
:* Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of the projector.</translate>
}}
}}

Revision as of 07:11, 7 November 2024

Mounting the Projector

Note: If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate.
  1. To make sure the most secure installation, please use a ViewSonic® wall or ceiling mount.
  2. Make sure the screws used to attach the mount to the projector meet the following specifications:
    • Screw type: M4 x 10
    • Maximum Screw Length: 10 mm
      Mounting points
CAUTION
  • Avoid installing the projector near a heat source or air conditioner.
  • Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of the projector.
Retrieved from "https://manuals.viewsonic.com/index.php?title=LS901HD_LS901-4K_Mounting_the_Projector&oldid=53847"