• Print Print

LS901HD LS901-4K Mounting the Projector: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older editNewer edit →
VY (talk | contribs)
7,615 edits
// via Wikitext Extension for VSCode
VY (talk | contribs)
7,615 edits
// via Wikitext Extension for VSCode
Line 1: Line 1:
==Mounting the Projector==
==Mounting the Projector==
:'''NOTE:''' If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate.
{{Note|If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate.}}
 
<ol>
    <li> To ensure the most secure installation, please use a ViewSonic® wall or ceiling mount.
    </li>
    <li>Ensure the screws used to attach the mount to the projector meet the following specifications:
        <ul>
            <li>Screw type: M4 x 10</li>
            <li>Maximum Screw Length: 10 mm</li>
        </ul>
    </li>
<div class="res-img">[[File:LS710HD_LS751HD_Mount.JPG|400px]]</div>
</ol>


<ol><li> To ensure the most secure installation, please use a ViewSonic® wall or ceiling mount.</li>
<li>Ensure the screws used to attach the mount to the projector meet the following specifications:</li>
::* Screw type: M4 x 10
::* Maximum Screw Length: 10 mm
[[File:LS710HD_LS751HD_Mount.JPG|400px]]</ol>
{{Note-yellow|'''CAUTION'''
{{Note-yellow|'''CAUTION'''
::* Avoid installing the projector near a heat source or air conditioner.
:* Avoid installing the projector near a heat source or air conditioner.
::* Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of the projector.}}
:* Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of the projector.
}}

Revision as of 07:29, 5 November 2024

Mounting the Projector

Note: If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate.
  1. To ensure the most secure installation, please use a ViewSonic® wall or ceiling mount.
  2. Ensure the screws used to attach the mount to the projector meet the following specifications:
    • Screw type: M4 x 10
    • Maximum Screw Length: 10 mm
CAUTION
  • Avoid installing the projector near a heat source or air conditioner.
  • Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of the projector.
Retrieved from "https://manuals.viewsonic.com/index.php?title=LS901HD_LS901-4K_Mounting_the_Projector&oldid=53241"