VA1655-3

Introduction

Package Contents

1. Portable display
2. Power adapter (optional)
3. USB Type C cable
4. USB Type C to Type A cable (optional)
5. Mini HDMI to HDMI cable
6. Quick start guide

Note: The cables included in your package may vary depending on your country. Please contact your local reseller for more information.

Product Overview

• 
  Front View
• 
  Rear View

Number	Description
1	I/O Ports
2	Power LED
3	Joy Key
4	Stand

I/O Ports

Number	Description
1	USB Type C
2	USB Type C
3	Mini HDMI
4	Audio Out

Note: For more information about the Joy Key, refer to Using the Joy Key.

Initial Setup

Tilt Angle Adjustment

Tilt the monitor backwards to the desired viewing angle by using the attached stand (30˚ to 53˚).

Note: When adjusting, support the monitor firmly with one hand while tilting the stand backwards with the other hand.

Using the Stand

Note: Place the monitor on a flat, stable surface to ensure safety and optimal performance.

Making Connections

Connecting to Power

The monitor can be powered in any of the following configurations:

Connecting to External Devices

Your external device(s) can be connected in any of the following configurations:

Type C Connection

Connect a Type C cable from your external device to a Type C port on the monitor.

Mini HDMI Connection

1. Connect the mini HDMI cable from your external device to the mini HDMI port on the monitor.
2. Connect the USB Type A to Type C cable from your external device.

Note: The USB Type A to Type C connection will also supply power to the monitor from the laptop. The power output must be greater than 10W.

Power Delivery

Powering a Laptop or Mobile Phone

If the included power adapter is connected to the monitor, then the monitor can charge a connected laptop or mobile phone.

Note: Power Delivery Output: DC 5V/9V/12V/15V/20V/Max 3A.

Power Supply Detection

This product will detect if the power supply device is an adapter, laptop or mobile phone.

• If the power source is an adapter or laptop, the default brightness value will be 100.
• If the power source is a mobile phone, the default brightness value will be 15.
• When using a mobile phone to power the monitor, the default brightness level will be 15.
Note: Due to the limited power output of the mobile phone, do not adjust the brightness level higher as this may cause the display to flash or shut down.

Using the Monitor

Adjusting the Viewing Angle

Height Adjustment

Lower or raise the monitor (0 to 130 mm).

Note: When adjusting, hold the monitor firmly on both sides and press down along the adjustment track.

Screen Orientation Adjustment (Monitor Pivot)

1. Raise the monitor to its maximum height and then tilt it back fully.
2. Rotate the monitor 90° clockwise or counterclockwise from landscape to portrait orientation.
Note:

• When adjusting, hold the monitor firmly on both sides.
• To rotate the screen image, manually change the system’s display orientation settings.

Swivel Angle Adjustment

Turn the monitor to the left or right (± 45˚).

Tilt Angle Adjustment

Tilt the monitor forwards or backwards (-5˚ to 22˚).

Note: Adjust the monitor by supporting the stand with one hand and gently tilting the screen with the other.

Turning the Monitor On/Off

Note:

1. Plug the connected power adapter into a power outlet.
2. Press the Power ( ) button to turn on the monitor.
3. To turn the monitor off, press the Power ( ) button again.
Note:

• The monitor will still consume power as long as the power cord is plugged in. If the monitor is not being used for extended periods, please unplug the power cord from the power outlet.
• If the OSD Menu is still on screen, press and hold the Power ( ) button for three seconds to turn the monitor off.

Using the Control Panel Keys

Activate Hot Keys, navigate the On-Screen Display (OSD) Menu, and change settings.

Quick Menu

Press the 1 (★) key to activate the Quick Menu

Note: Follow the key guide that appears on the screen to select the option or make adjustments.

Icon	Menu	Description
	ViewMode	Select one of the preset color settings.
	Volume	Adjust the level, or mute the volume.
	Contrast/Brightness	Adjust the contrast or brightness level.
	Input Select	Select the input source.
	Exit	Exit the Quick Menu.

Hot Keys

When the On-Screen Display (OSD) Menu is off, you can quickly access special functions by using the Control Panel Keys.

Key	Description
1(★) + 2	Press and hold the keys to lock/unlock the OSD Menu. When the menu appears on the screen, continue holding both keys for 10 seconds to lock/unlock the OSD Menu. If the OSD Menu is locked, the below message will appear on the screen:
2 + 3	Press and hold the keys to lock/unlock the Power ( ) button. When the menu appears on the screen, continue holding the key for 10 seconds to lock/unlock the Power ( ) button. If the Power ( ) button is locked, the below message will appear on the screen:
3 + 4	Press the keys to display/hide the Boot up Screen when the monitor is turned on.

Configuring the Settings

General Operations

1. Press the 2/3/4 key to display the On-Screen Display (OSD) Menu.

2. Press the 1(★) or 2 key to select the main menu. Then press the 3 key to enter the selected menu.

3. Press the 1(★) or 2 key to select the desired menu option. Then press the 3 key to enter the sub-menu.

4. Press the 1(★) or 2 key to adjust/select the setting. Then press the 3 key to confirm.

Note: Certain menu option adjustments do not require the user to press the 3 key to confirm the selection. Follow the key guide that appears on the screen to select the option or make adjustments.
5. Press the 4 key to return to the previous menu.

Appendix

Specifications

Item	Category	Specifications
LCD	Type	IPS type, a-si TFT Active Matrix 1920 x 1080 LCD, 0.3108 (H) mm x 0.3108 (V) mm pixel pitch
	Display Size	68.58 cm
		27" viewable
	Color Filter	RGB Vertical Stripe
	Glass Surface	Anti-Glare (Haze 25%), Hard Coating (3H)
Input Signal	Video Sync	TMDS digital (100 Ω) DisplayPort: fh: 24~183 kHz, fv: 48~165 Hz HDMI: fh: 30~160 kHz, fv: 48~144 Hz
Compatibility	PC	up to 1920 x 1080
	Macintosh	up to 1920 x 1080
Resolution and Timings	Recommended	1920 x 1080 @ 60 Hz
	Supported	1920 x 1080 @ 50, 60, 75, 100, 120, 144, 165, 180, 200, 220, 240 Hz 1680 x 1050 @ 60 Hz 1600 x 1200 @ 60 Hz 1600 x 900 @ 60 Hz 1440 x 900 @ 60, 75 Hz 1440 x 576 @ 50 Hz 1400 x 1050 @ 60, 75 Hz 1366 x 768 @ 60 Hz 1360 x 768 @ 60 Hz 1280 x 1024 @ 50, 60, 75 Hz 1280 x 960 @ 50, 60, 75 Hz 1280 x 800 @ 60, 75 Hz 1280 x 768 @ 50, 60, 75 Hz 1280 x 720 @ 60 Hz 1152 x 900 @ 66 Hz 1152 x 870 @ 75 Hz 1152 x 864 @ 60, 75 Hz 1024 x 768 @ 50, 60, 70, 72, 75 Hz 1024 x 600 @ 60 Hz 848 x 480 @ 60 Hz 832 x 624 @ 75 Hz 800 x 600 @ 56, 60, 72, 75 Hz 720 x 576 @ 50 Hz 720 x 480 @ 60 Hz 720 x 400 @ 70 Hz 640 x 480 @ 50, 60, 66, 72, 75 Hz 640 x 400 @ 60, 70 Hz 640 x 350 @ 70 Hz
Power	Input Voltage	AC 100-240V, 50/60 Hz (auto switch)
Display Area	Active Size (H x V)	596.74 x 335.66 mm
		23.49" x 13.21"
Operating Conditons	Altitude	3.048 km
		10,000 ft
	Relative Humidity	20% to 90% (non-condensing)
	Temperature	0° C to 40° C
		32° F to 104° F
Storage Conditions	Altitude	12 km
		39,370.1 ft
	Relative Humidity	5% to 90% (non-condensing)
	Temperature	-20° C to 60° C
		-4° F to 140° F
Dimensions (with stand)	Physical (W x H x D)	615 x 528~398 x 228 mm
		24.2" x 20.7"~15.6" x 8.9"
Weight (with stand)	Physical	5.6 kg
		12.3 lb
Dimensions (without stand)	Physical (W x H x D)	615 x 363.8 x 46 mm
		24.2" x 14.3" x 1.8"
Weight (without stand)	Physical (W x H x D)	3.7 kg
		8.0 lb
Wall Mount	Dimensions	100 x 100 mm
Power Consumption	On	30W (Typical)
	Standby	< 0.5W (Maximum)
	Off	< 0.3W (Maximum)

On-Screen Display (OSD) Menu Tree

Input SelectAudio AdjustViewModeColor AdjustManual Image AdjustSetup Menu

Sub-menu
HDMI 1
HDMI 2
DisplayPort

Sub-menu	Menu Option
Volume	(-/+, 0~100)/1

Sub-menu
Standard
FPS Game
RTS Game
MOBA Game
Movie
Web
Text
MAC
Mono

Sub-menu	Menu Option
Contrast/Brightness	Contrast	(-/+, 0~100)/1
	Brightness	(-/+, 0~100)/1
Color Temperature	sRGB
	Bluish
	Cool
	Native
	Warm
	User Color	Red	(-/+, 0~100)/1
		Green	(-/+, 0~100)/1
		Blue	(-/+, 0~100)/1
Color Space	Auto
	RGB
	YUV
Color Range	Auto
	Full Range
	Limited Range

Sub-menu	Menu Option
Sharpness	(-/+, 0~100)/25
Blue Light Filter	(-/+, 0~100)/1
Aspect Ratio	4:3
	5:4
	16:9
	16:10
Overscan	On
	Off
Black Stabilization	(-/+, 0~100)/10
Advanced DCR	(-/+, 0~100)/25
Response Time	Standard
	Advanced
	Ultra Fast

Sub-menu	Menu Option
Language	English
	Français
	Deutsch
	Español
	Italiano
	Suomi
	Svenska
	Русский
	Türkçe
	Česká
	Tiếng Việt
	日本語
	한국어
	繁體中文
	简体中文
Adaptive Sync	On
	Off
HDR	On
	Off
1ms Mode	On
	Off
Overclocking	On
	Off
OSD Pivot	90°
	270°
	Off
Information
OSD Timeout	(-/+, 5/15/30/60)
OSD Background	On
	Off
Power Indicator	On
	Off
Auto Power Off	On
	Off
Sleep	30 minutes
	45 minutes
	60 minutes
	120 minutes
	Off
ECO Mode	Standard
	Optimize
	Conserve
DisplayPort 1.1	On
	Off
Auto Detect	On
	Off
DDC/CI	On
	Off
Memory Recall

XG2709A_UG_ENG_1a_20241014