• Print Print

X10-4K Remote Control: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older editNewer edit →
Line 8: Line 8:
|-
|-
| style="font-weight:bold;" | Power
| style="font-weight:bold;" | Power
| [[File:X10_Power_Icon.png|100px]]
| [[File:X10_Power_Icon.png|50px]]
| Turns the projector On or Off.
| Turns the projector On or Off.
|-
|-
| style="font-weight:bold;" | Source
| style="font-weight:bold;" | Source
|  
| [[File:X10_Source_Icon.png|50px]]
| Displays the input source selection bar.
| Displays the input source selection bar.
|-
|-
| style="font-weight:bold;" | Focus
| style="font-weight:bold;" | Focus
|  
| [[File:X10_Focus_Icon.png|50px]]
| Automatically focus the image.
| Automatically focus the image.
To manually adjust, press and hold the Focus button on the remote control for three (3) seconds.
To manually adjust, press and hold the Focus button on the remote control for three (3) seconds.
|-
|-
| style="font-weight:bold;" | Setting
| style="font-weight:bold;" | Setting
|  
| [[File:X10_Setting_Icon.png|50px]]
| Displays the Settings menu.
| Displays the Settings menu.
|-
|-
| style="font-weight:bold;" | Audio Mode
| style="font-weight:bold;" | Audio Mode
|  
| [[File:X10_Audio_Icon.png|50px]]
| Displays the speaker settings.
| Displays the speaker settings.
|-
|-
| style="font-weight:bold;" | Bluetooth
| style="font-weight:bold;" | Bluetooth
|  
| [[File:X10_BT_Icon.png|50px]]
| View Bluetooth options.
| View Bluetooth options.
|-
|-
| style="font-weight:bold;" | Up/Down/Left/Right
| style="font-weight:bold;" | Up/Down/Left/Right
|  
| [[File:X10_Wheel_Icon.png|50px]]
| rowspan="2" | Navigates and selects the desired menu items and makes adjustments.
| rowspan="2" | Navigates and selects the desired menu items and makes adjustments.
|-
|-
Line 40: Line 40:
|-
|-
| style="font-weight:bold;" | OK
| style="font-weight:bold;" | OK
|  
| [[File:X10_Ok_Icon.png|50px]]
| Confirms the selection.
| Confirms the selection.
|-
|-
| style="font-weight:bold;" | Return
| style="font-weight:bold;" | Return
|  
| [[File:X10_Return_Icon.png|50px]]
| Returns to the previous screen.
| Returns to the previous screen.
|-
|-
| style="font-weight:bold;" | Home
| style="font-weight:bold;" | Home
|  
| [[File:X10_Home_Icon.png|50px]]
| Access the Home menu.
| Access the Home menu.
|-
|-
| style="font-weight:bold;" | Volume Control
| style="font-weight:bold;" | Volume Control
|  
| [[File:X10_Volume_Icon.png|50px]]
| Increases/decreases the volume level or mutes/unmutes it.
| Increases/decreases the volume level or mutes/unmutes it.
|}
|}

Revision as of 09:49, 29 April 2020

Overview

Remote Control
Button Icon Description
Power Turns the projector On or Off.
Source Displays the input source selection bar.
Focus Automatically focus the image.

To manually adjust, press and hold the Focus button on the remote control for three (3) seconds.

Setting Displays the Settings menu.
Audio Mode Displays the speaker settings.
Bluetooth View Bluetooth options.
Up/Down/Left/Right Navigates and selects the desired menu items and makes adjustments.
Shuttle Wheel Left/Right
OK Confirms the selection.
Return Returns to the previous screen.
Home Access the Home menu.
Volume Control Increases/decreases the volume level or mutes/unmutes it.

Effective Range

IR Receiver Location

To ensure proper function of the remote control follow the steps below:

  1. The remote control must be held at an angle within 30° perpendicular to the projector’s IR remote control sensor(s).
  2. The distance between the remote control and the sensor(s) should not exceed 8 m (26 ft.)
NOTE: Refer to the illustration for the location of the infrared (IR) remote control sensor(s).

Replacing the Batteries

  1. Remove the battery cover from the bottom of the remote control by pressing the finger grip and sliding it across.
  2. Remove any existing batteries (if necessary) and install two AAA batteries.
  3. Replace the battery cover by aligning it with the base and pushing it back into position.
NOTE:
  • Avoid leaving the remote control and batteries in excessive heat or a humid environment.
  • Replace only with the same or equivalent type recommended by the battery manufacturer.
  • If the battery is drained or if you will not be using the remote control for an extended period of time, remove the battery to avoid damage to the remote control.
  • Dispose of used batteries according to the manufacturer’s instructions and local environment regulations for your region.
Retrieved from "https://manuals.viewsonic.com/index.php?title=X10-4K_Remote_Control&oldid=399"