• Print Print

VPC33 Initial Setup: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
Newer edit →
Created page with "<noinclude> {{Sticky_Menu_VPC-A31-O1 |1=VPC33_Introduction |2=VPC33_Initial_Setup |3=VPC33_Making_Connections |4=VPC33_Using_the_Device |5=VPC33_Appendix |6=VPC33_Regulatory_and_Service_Information }} </noinclude> =Installing the VPC33= <ol><li>Remove the slot-in PC cover of the display.</li> <div class="res-img">600px</div> <li>Carefully insert the VPC33 into the PC slot of the display.</li> <div class="res-img">File:VPC33_Initial_Se..."
 
Line 15: Line 15:
<div class="res-img">[[File:VPC33_Initial_Setup_2.png|700px]]</div>
<div class="res-img">[[File:VPC33_Initial_Setup_2.png|700px]]</div>
<li>Secure the VPC33 to the display with the two (2) screws.</li>
<li>Secure the VPC33 to the display with the two (2) screws.</li>
:'''NOTE:''' Please note that the three (3) antennas must be installed on the VPC33.</ol>
:'''NOTE:'''  
:*Please note that the three (3) antennas must be installed on the VPC33.
:*Please pay attention to the installation direction of the VPC33/VPC35/VPC37, with the vents facing outwards to avoid damage.</ol>




Revision as of 03:18, 23 November 2023

VPC33 Initial Setup
Introduction
Initial Setup
Making Connections
Using the Device
Settings
Pre-installed Applications and Settings
[[{{{7}}}|Appendix]]
[[{{{8}}}|Regulatory and Service Information]]

Installing the VPC33

  1. Remove the slot-in PC cover of the display.
  2. Carefully insert the VPC33 into the PC slot of the display.
  3. Secure the VPC33 to the display with the two (2) screws.
    4. NOTE:
    • Please note that the three (3) antennas must be installed on the VPC33.
    • Please pay attention to the installation direction of the VPC33/VPC35/VPC37, with the vents facing outwards to avoid damage.
Retrieved from "https://manuals.viewsonic.com/index.php?title=VPC33_Initial_Setup&oldid=37147"