Revision as of 09:00, 26 September 2024

Maintaining the Projector

Make sure the projector is turned off and the power cable is unplugged from the power outlet.
Never remove any parts from the projector. Contact ViewSonic® or a reseller when any part of the projector needs replacing.
Never spray or pour any liquid directly onto the case.
Handle the projector with care, as a darker-colored projector, if scuffed, may show marks more clearly than a lighter-colored projector.

Use a canister of compressed air to remove dust.
If the lens is still not clean, use lens-cleaning paper or moisten a soft cloth with lens cleaner and gently wipe the surface.

Important: Never rub the lens with abrasive materials.

Use a soft, lint-free, dry cloth to remove dirt or dust.
If the case is still not clean, apply a small amount of non-ammonia, non-alcohol based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.

Important: Never use wax, alcohol, benzene, thinner, or other chemical detergents.

If you intend to store the projector for an extended period of time:

Ensure the temperature and humidity of the storage area are within the recommend range.
Retract the adjuster foot completely.
Remove the batteries from the remote control.
Pack the projector in its original packaging or equivalent.

ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the lens or case. Some chemical cleaners have been reported to damage the lens and/or case of the projector.
ViewSonic® will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.

@@ Line 10: / Line 10: @@
 * <translate><!--T:8--> Use a canister of compressed air to remove dust.</translate>
 * <translate><!--T:9--> If the lens is still not clean, use lens-cleaning paper or moisten a soft cloth with lens cleaner and gently wipe the surface.</translate>
-{{Note-yellow| '''<translate><!--T:10--> CAUTION:</translate>''' <translate><!--T:11--> Never rub the lens with abrasive materials.</translate>}}
+{{Important|<translate><!--T:11--> Never rub the lens with abrasive materials.</translate>}}
 ===<translate><!--T:12--> Cleaning the Case</translate>===
 * <translate><!--T:13--> Use a soft, lint-free, dry cloth to remove dirt or dust.</translate>
 * <translate><!--T:14--> If the case is still not clean, apply a small amount of non-ammonia, non-alcohol based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.</translate>
-{{Note-yellow| '''<translate><!--T:15--> CAUTION:</translate>''' <translate><!--T:16--> Never use wax, alcohol, benzene, thinner, or other chemical detergents.</translate>}}
+{{Important|<translate><!--T:16--> Never use wax, alcohol, benzene, thinner, or other chemical detergents.</translate>}}
 ===<translate><!--T:17--> Storing the Projector</translate>===