• Print Print

LS901HD LS901-4K Mounting the Projector: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older edit
VY (talk | contribs)
7,615 edits
// via Wikitext Extension for VSCode
VY (talk | contribs)
7,615 edits
// via Wikitext Extension for VSCode
 
(7 intermediate revisions by 2 users not shown)
Line 1: Line 1:
==Mounting the Projector==
==Mounting the Projector==
:'''NOTE:''' If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate.
{{Note|<translate><!--T:1--> If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate.</translate>}}


<ol><li> To ensure the most secure installation, please use a ViewSonic® wall or ceiling mount.</li>
<ol>
<li>Ensure the screws used to attach the mount to the projector meet the following specifications:</li>
    <li> <translate><!--T:2--> To make sure the most secure installation, please use a ViewSonic® wall or ceiling mount.</translate>
::* Screw type: M4 x 10
    </li>
::* Maximum Screw Length: 10 mm
    <li><translate><!--T:3--> Make sure the screws used to attach the mount to the projector meet the following specifications:</translate>
[[File:LS710HD_LS751HD_Mount.JPG|400px]]</ol>
        <ul>
{{Note-yellow|'''CAUTION'''
            <li><translate><!--T:4--> Screw type: M4 x 10</translate></li>
::* Avoid installing the projector near a heat source or air conditioner.
            <li><translate><!--T:5--> Maximum Screw Length: 10 mm</translate>
::* Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of the projector.}}
                <div class="res-img">[[File:LS901HD_Mount.png|400px| <translate><!--T:6--> Mounting points</translate> | alt= <translate><!--T:7--> Mounting points</translate>]]</div>
            </li>
        </ul>
    </li>
 
</ol>
 
{{Note-yellow|'''<translate>CAUTION</translate>'''
:* <translate>Avoid installing the projector near a heat source or air conditioner.</translate>
:* <translate>Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of the projector.</translate>
}}

Latest revision as of 05:55, 8 November 2024

Mounting the Projector

Note: If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate.
  1. To make sure the most secure installation, please use a ViewSonic® wall or ceiling mount.
  2. Make sure the screws used to attach the mount to the projector meet the following specifications:
    • Screw type: M4 x 10
    • Maximum Screw Length: 10 mm
      Mounting points
CAUTION
  • Avoid installing the projector near a heat source or air conditioner.
  • Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of the projector.
Retrieved from "https://manuals.viewsonic.com/index.php?title=LS901HD_LS901-4K_Mounting_the_Projector&oldid=55122"