|
|
| (2 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| | {{Projector_Maintenance}} |
| | |
| __NOTOC__ | | __NOTOC__ |
| =<translate><!--T:1--> Maintaining the Projector</translate>=
| | {{#tweekihide:sidebar-right}} |
| ===<translate><!--T:2--> General Precautions</translate>===
| | {{#tweekihide:subnav}} |
| * <translate><!--T:3--> Make sure the projector is turned off and the power cable is unplugged from the power outlet.</translate>
| |
| * <translate><!--T:4--> Never remove any parts from the projector. Contact ViewSonic® or a reseller when any part of the projector needs replacing.</translate>
| |
| * <translate><!--T:5--> Never spray or pour any liquid directly onto the case.</translate>
| |
| * <translate><!--T:6--> Handle the projector with care, as a darker-colored projector, if scuffed, may show marks more clearly than a lighter-colored projector.</translate>
| |
| | |
| ===<translate><!--T:7--> Cleaning the Lens</translate>===
| |
| * <translate><!--T:8--> Use a canister of compressed air to remove dust.</translate>
| |
| * <translate><!--T:9--> If the lens is still not clean, use lens-cleaning paper or moisten a soft cloth with lens cleaner and gently wipe the surface.</translate>
| |
| {{Note-yellow| '''<translate><!--T:10--> CAUTION:</translate>''' <translate><!--T:11--> Never rub the lens with abrasive materials.</translate>}} | |
| | |
| ===<translate><!--T:12--> Cleaning the Case</translate>===
| |
| * <translate><!--T:13--> Use a soft, lint-free, dry cloth to remove dirt or dust.</translate>
| |
| * <translate><!--T:14--> If the case is still not clean, apply a small amount of non-ammonia, non-alcohol based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.</translate>
| |
| {{Note-yellow| '''<translate><!--T:15--> CAUTION:</translate>''' <translate><!--T:16--> Never use wax, alcohol, benzene, thinner, or other chemical detergents.</translate>}}
| |
| | |
| ===<translate><!--T:17--> Storing the Projector</translate>===
| |
| <translate><!--T:18--> If you intend to store the projector for an extended period of time:</translate>
| |
| * <translate><!--T:19--> Ensure the temperature and humidity of the storage area are within the recommend range.</translate>
| |
| * <translate><!--T:20--> Retract the adjuster foot completely.</translate>
| |
| * <translate><!--T:21--> Remove the batteries from the remote control.</translate>
| |
| * <translate><!--T:22--> Pack the projector in its original packaging or equivalent.</translate>
| |
| | |
| ===<translate><!--T:23--> Disclaimer</translate>===
| |
| *<translate><!--T:24--> ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the lens or case. Some chemical cleaners have been reported to damage the lens and/or case of the projector.</translate>
| |
| *<translate><!--T:25--> ViewSonic® will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.</translate>
| |
| | |
| {{#seo: | |
| |title=ViewSonic Projector Maintenance
| |
| |title_mode=append
| |
| |keywords=ViewSonic, projector, Maintenance, Fix, Clean, Care
| |
| |description=Learn how to maintain and care for your ViewSonic projector.
| |
| }} | |
| | |
| [[Category:Projector]]
| |
General Precautions
- Before performing any maintenance, turn off the projector and unplug the power cord from the outlet.
- Do not spray or pour liquid directly onto the projector.
- Handle the projector with care, as scratches may be more visible on dark-colored models.
Cleaning the Lens
- Use an air blower to remove dust.
- Use lens-cleaning paper or a soft, moist cloth with lens cleaner to gently wipe away smudges from the lenses.
Important: Do not use abrasive materials or glass cleaner to clean the lens.
Cleaning the Case
- Use a soft, dry cloth.
- If the case is still not clean, apply a small amount of non-ammonia, non-alcohol based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.
Important: Do not use wax, alcohol, benzene, thinner, or other chemical detergents for cleaning.
Storing the Projector
If the projector will not be used for an extended period of time, observe the following:
- Retract the adjustable foot completely.
- Remove the batteries from the remote control.
- Pack the projector in its original packaging.
- Store the projector in a location that falls within the projector’s storage conditions.
Disclaimer
- ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the display screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the monitor.
- ViewSonic® will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.