Rob.vsi: /* Ethernet Connection */

2023-10-25T07:16:57Z

Ethernet Connection

← Older revision		Revision as of 07:16, 25 October 2023
Line 54:		Line 54:
	==Ethernet Connection==		==Ethernet Connection==
	Connect one end of your LAN (RJ45) cable to the LAN (RJ45) port of the monitor. Then connect the other end to your network.		Connect one end of your LAN (RJ45) cable to the LAN (RJ45) port of the monitor. Then connect the other end to your network.
	<div class="res-img">[[File:~~VG3419C_Connect_Ethernet~~.png\|400px\|Connecting External Devices]]</div>		<div class="res-img">[[File:VG3456a_Connect_Ethernet.png\|400px\|Connecting External Devices]]</div>

	Next, you must connect your computer to the monitor by either:		Next, you must connect your computer to the monitor by either:

Rob.vsi: Created page with " {{Sticky_Menu_Monitor_3.0_No_Adv |1=VG3456a_Introduction |2=VG3456a_Initial_Setup |3=VG3456a_Connecting_Power_and_Devices |4=VG3456a_Adjusting_the_Viewing_Angle |5=VG3456a_Quick_Menu |6=VG3456a_Hot_Keys |7=VG3456a_On-Screen_Display_Menu |8=VG3456a_On-Screen_Display_Menu_Tree |9=VG3456a_On-Screen_Display_Menu_Options |10=VG3456a_Specifications |11=VG3456a_Regulatory_and_Service_Information }} =Connecting to Power=
Connect the power cord t..."

2023-10-25T07:14:38Z

Created page with "<noinclude> {{Sticky_Menu_Monitor_3.0_No_Adv |1=VG3456a_Introduction |2=VG3456a_Initial_Setup |3=VG3456a_Connecting_Power_and_Devices |4=VG3456a_Adjusting_the_Viewing_Angle |5=VG3456a_Quick_Menu |6=VG3456a_Hot_Keys |7=VG3456a_On-Screen_Display_Menu |8=VG3456a_On-Screen_Display_Menu_Tree |9=VG3456a_On-Screen_Display_Menu_Options |10=VG3456a_Specifications |11=VG3456a_Regulatory_and_Service_Information }} </noinclude> =Connecting to Power= <ol><li>Connect the power cord t..."

New page

<noinclude>
{{Sticky_Menu_Monitor_3.0_No_Adv
|1=VG3456a_Introduction
|2=VG3456a_Initial_Setup
|3=VG3456a_Connecting_Power_and_Devices
|4=VG3456a_Adjusting_the_Viewing_Angle
|5=VG3456a_Quick_Menu
|6=VG3456a_Hot_Keys
|7=VG3456a_On-Screen_Display_Menu
|8=VG3456a_On-Screen_Display_Menu_Tree
|9=VG3456a_On-Screen_Display_Menu_Options
|10=VG3456a_Specifications
|11=VG3456a_Regulatory_and_Service_Information
}}
</noinclude>
=Connecting to Power=
<ol><li>Connect the power cord to the AC IN jack at the rear of the device.</li>
<li>Plug the power cord plug into a power outlet.</li>
<div class="res-img">[[File:VG3456a_Connecting_to_Power.png|400px|Connecting to Power]]</div></ol>

=Connecting External Devices=
==HDMI Connection==
Connect one end of an HDMI cable to the HDMI port of your monitor. Then connect the other end of the cable to the HDMI port of your computer.
<div class="res-img">[[File:VG3456a_Connect_HDMI.png|400px|Connecting External Devices]]</div>

==DisplayPort Connection==
Connect one end of a DisplayPort cable to the DisplayPort port. Then connect the other end of the cable to the DisplayPort or mini DP port of your computer.
:'''NOTE:''' To connect the monitor to the Thunderbolt port (v. 1&2) on your Mac, connect the mini DP end of the “mini DP to DisplayPort cable” to the Thunderbolt output of your Mac. Then connect the other end of the cable to the DisplayPort port of the monitor.
<div class="res-img">[[File:VG3456a_Connect_DP.png|400px|Connecting External Devices]]</div>

==USB Connection==
Connect one end of a USB cable to a USB port of the monitor. Then connect the other end of the cable to a USB port of your computer.
<div class="res-img">[[File:VG3456a_Connect_USB.png|400px|Connecting External Devices]]</div>
:'''NOTE:''' The monitor supports two (2) types of USB ports. When making the connection(s), observe the following guidelines:
{| class="wikitable" style="background-color:#ffffff; width:60%; text-align:center;"
!style="background-color:#DB0025; color:#ffffff; width:15%;"|USB Type
!style="background-color:#DB0025; color:#ffffff; width:10%;"|Quantity
!style="background-color:#DB0025; color:#ffffff;"|Description
|-
|'''Type A'''
|4
|style="text-align:left;"|Connection for your Type A peripheral device(s) (e.g., storage device, keyboard, mouse).
:'''NOTE:''' To use peripherals, please ensure your computer is also connected to the monitor’s USB Type B port.
|-
|'''Type C'''
|2
|style="text-align:left;"|The USB Type C port in the rear is fully functional with video, audio, data and PD transmission. Make sure your Type C output device and cable support video signal transmission for video output use.
:'''NOTE:''' The USB Type C port supports the following charging specifications: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/4.9A (LPS).
The USB Type C at the front bottom is a downstream port for peripheral device(s).
:'''NOTE:''' The USB Type C port supports the following charging specification: 5V/3A.
|}
:'''NOTE:''' If your device comes with a USB Type C port, you can directly connect to the monitor with a USB Type C to USB Type C cable. If you are required to connect through either HDMI or DP to the monitor, please also use a USB Type C to USB Type A cable to connect to the monitor to enable data transmission.

==Ethernet Connection==
Connect one end of your LAN (RJ45) cable to the LAN (RJ45) port of the monitor. Then connect the other end to your network.
<div class="res-img">[[File:VG3419C_Connect_Ethernet.png|400px|Connecting External Devices]]</div>

Next, you must connect your computer to the monitor by either:
<ul><li>USB Type C</li>
<div class="res-img">[[File:VG3456a_Connect_Ethernet_USB_C.png|400px|Connecting External Devices]]</div>
<u>'''OR'''</u></ul>
<ul><li>HDMI and USB Upstream</li>
<div class="res-img">[[File:VG3456a_Connect_Ethernet_HDMI.png|400px|Connecting External Devices]]</div>
<u>'''OR'''</u>
<li>DisplayPort and USB Upstream</li>
<div class="res-img">[[File:VG3456a_Connect_Ethernet_DP.png|400px|Connecting External Devices]]</div></ul>

{{#seo:
|title=ViewSonic Monitor
|title_mode=append
|keywords=VG3456a, HDMI, DisplayPort, USB, connecting devices
|description=Learn about the connection methods for the VG3456a monitor.
}}

[[Category:VG3456a]]

VG3456a Connecting Power and Devices - Revision history

Rob.vsi: /* Ethernet Connection */