View source for VX3218-PC-mhd Initial Setup

<noinclude>
{{Sticky_Menu_Monitor_2.1_SU
|1=VX3218-PC-mhd_Introduction
|2=VX3218-PC-mhd_Initial_Setup
|3=VX3218-PC-mhd_Connecting_Power_and_Devices
|4=VX3218-PC-mhd_Adjusting_the_Viewing_Angle
|5=VX3218-PC-mhd_Quick_Menu
|6=VX3218-PC-mhd_Hot_Keys
|7=VX3218-PC-mhd_On-Screen_Display_Menu
|8=VX3218-PC-mhd_On-Screen_Display_Menu_Tree
|9=VX3218-PC-mhd_Specifications
|10=VX3218-PC-mhd_Regulatory_and_Service_Information
}}
</noinclude>
=Stand Installation=
<div class="res-img">[[File:VX3218-PC-mhd_Stand_Installation.png|400px]]</div>

{{Note-yellow|Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.}}

=Wall Mounting=
Refer to the table below for the standard dimensions for wall mount kits.

{{Note-yellow|For use only with a UL certified wall mount kit/bracket. To obtain a wall-mounting kit or height adjustment base, contact ViewSonic® or your local dealer.}}

{| class="wikitable" style="text-align: center;"
|-
! style="background-color:#c41230; color:#ffffff;"|Maximum Loading
! style="background-color:#c41230; color:#ffffff;"|Hole Pattern (W x H)
! style="background-color:#c41230; color:#ffffff;"|Interface Pad (W x H x D)
! style="background-color:#c41230; color:#ffffff;"|Pad Hole
! style="background-color:#c41230; color:#ffffff;"|Screw Specification & Quantity
|-
|14 kg
|100 x 100 mm
|115 x 115 x 2.6 mm
|Ø 5 mm
|M4 x 10 mm - 4 pieces
|}

<ol><li>Turn off the device and disconnect all cables.</li>
<li>Place the device on a flat, stable surface with the screen facing down.</li>
<li>Remove the stand.</li>
:<div class="res-img">[[File:VX3218-PC-mhd_Wall_Mounting.png|700px]]</div>
<li>Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).</li>
:<div class="res-img">[[File:VX3218-PC-mhd_Wall_Mounting_VESA.png|300px]]</div>
<li>Follow the instructions that come with the wall mounting kit to mount the monitor onto the wall.</li></ol>

<noinclude>=[[Monitor_Security_Slot| Using the Security Slot]]=</noinclude>

{{#seo:
|title=ViewSonic Monitor
|title_mode=append
|keywords=VX3218-PC-mhd, security slot, VESA, stand installation
|description=VX3218-PC-mhd stand installation and wall mounting procedures. 
}}

<metadesc><meta name=viewport content="width=device-width, initial-scale=1"></metadesc>

[[Category:VX3218-PC-mhd]]