View source for M2e Remote Control

<noinclude>
{{Sticky_Menu_Projector
|1=M2e_Introduction
|2=M2e_Remote_Control
|3=M2e_Initial_Setup
|4=M2e_Connecting_Power_and_Devices
|5=M2e_Using_the_Projector
|6=M2e_Operation
|7=M2e_On-Screen_Display_Menu_Tree
|8=M2e_On-Screen_Display_Menu_Options
|9=M2e_Specifications
|10=M2e_Regulatory_and_Service_Information
}}
</noinclude>
=Overview=
[[File:M2e_Remote_Control.png|thumb|250px| Remote Control]]

{| class="wikitable" width=45% style="text-align: center";
! style="font-weight:bold; background-color:#c41230; color:#ffffff;" | Number
! style="text-align: center; font-weight:bold; background-color:#c41230; color:#ffffff;" | Button
! style="text-align: center; font-weight:bold; background-color:#c41230; color:#ffffff;" | Description
|-
| '''1'''
| Power
| Turns the projector On or Off.
|-
| '''2'''
| Source
| Displays the input source selection bar.
|-
| '''3'''
| Focus
| Automatically focus the image.
To manually adjust, press and hold the Focus button on the remote control for three (3) seconds.
|-
| '''4'''
| Bluetooth
| Launch Bluetooth search.
|-
| '''5'''
| OK
| Confirms the selection.
|-
| '''6'''
| Up/Down/Left/Right
| Navigates and selects the desired menu items and makes adjustments.
|-
| '''7'''
| Setting
| Displays the Setting menu.
|-
| '''8'''
| Return
| Returns to the previous screen.
|-
| '''9'''
| Home
| Access the Home screen.
|-
| '''10'''
| Volume
| Increase/Decrease the volume level.
|-
| '''11'''
| Forwards/Backwards
| Move content forwards/backwards.
|-
| '''12'''
| Mute
| Mute/unmute.
|-
| '''13'''
| Play/Pause
| Play/Pause content.
|-
|}

=Effective Range=
[[File:M2e_remote_Control_Effective_Range.png|thumb|300px| IR Receiver Location]]
To ensure proper function of the remote control follow the steps below:
# The remote control must be held at an angle within 30° perpendicular to the projector’s IR remote control sensor(s).
# The distance between the remote control and the sensor(s) should not exceed 8 m (26 ft.)

:::<small>'''NOTE:''' Refer to the illustration for the location of the infrared (IR) remote control sensor(s).</small>

=Replacing the Batteries=
# Remove the battery cover from the bottom of the remote control by pressing the finger grip and sliding it across.
# Remove any existing batteries (if necessary) and install two AAA batteries.
# Replace the battery cover by aligning it with the base and pushing it back into position.
:::<small>'''NOTE:'''
:::* Avoid leaving the remote control and batteries in excessive heat or a humid environment.
:::* Replace only with the same or equivalent type recommended by the battery manufacturer.
:::* If the battery is drained or if you will not be using the remote control for an extended period of time, remove the battery to avoid damage to the remote control.
:::* Dispose of used batteries according to the manufacturer’s instructions and local environment regulations for your region.</small>

{{#seo:
|title=ViewSonic Projectors
|title_mode=append
|keywords=Projectors, M2, M2e, M Series, Remote Control
|description= An introduction to the M2e projector's remote control.
}}

[[Category:M2e]]