View source for M2 Operation

<noinclude>
{{Sticky_Menu_Projector
|1=M2_Introduction
|2=M2_Remote_Control
|3=M2_Initial_Setup
|4=M2_Connecting_Power_and_Devices
|5=M2_Using_the_Projector
|6=M2_Operation
|7=M2_On-Screen_Display_Menu_Tree
|8=M2_On-Screen_Display_Menu_Options
|9=M2_Specifications
|10=M2_Regulatory_and_Service_Information
}}
{{Top}}
</noinclude>
=Home Screen=
The Home Screen is displayed every time you start the projector. To navigate the Home Screen, simply use the directional buttons on the remote control. You can return to the main Home Screen at any time by pressing the Home button on the remote control, regardless of what page you are on.
<div class="res-img">[[File:X10_Home_Screen.png|500px]]</div>

==Aptoide==
The projector is pre-loaded with the Aptoide store, which allows users to download and install different Apps.
<gallery widths=300px heights=300px mode="nolines">
File:X10_Aptoide.png| Step 1 - Select Aptoide
File:X10_Aptoide_2.png| Step 2 - Navigate the store
</gallery>
# Select: '''Home''' > '''Aptoide'''.
# Use the directional buttons to navigate the menu options. When you find your preferred App, press the '''OK''' button to install it.
::'''NOTE:''' 
:::* Users can install third-party Apps by .apk file in '''File Management'''. However, some third-party Apps may have compatibility issues.
:::* Apps not pre-loaded by ViewSonic may not be compatible or work properly.
:::* Some Apps may require a keyboard or mouse.
:::* Some Apps may be Region-Specific.

==Apps Center==
View, launch, and uninstall Apps.
<gallery widths=300px heights=300px mode="nolines">
File:X10_Apps_Center_2.png| Step 1 - Select Apps Center
File:X10_Apps_Center.png| Step 2 - Launch the App
</gallery>
# To view your Apps, select: '''Home''' > '''Apps Center'''.
# Use the directional buttons to select the desired App. Then press '''OK''' on the remote control to launch the App.
::'''NOTE:''' Press the '''Home''' button on the remote control to return to the '''Home Screen''' at anytime.

===To Uninstall Apps===
# Open the '''Apps Center''' by selecting: '''Home''' > '''Apps Center'''.
# Use the directional buttons to select the desired App.
# Press and hold '''OK''' on the remote control for three (3) seconds.
# Select '''OK''' to uninstall the App.
::'''NOTE:''' Press the '''Home''' button on the remote control to return to the '''Home Screen''' at anytime.

===How to Access Netflix===
<youtube>eOkqf2V-iVQ</youtube>

==File Management==
Easily manage files and folders.
<gallery widths=300px heights=300px mode="nolines">
File:X10_File_Management_2.png| Step 1 - Select File Management
File:X10_File_Management.png| Step 2 - Navigate the files
</gallery>
# Select: '''Home''' > '''File Management'''.
# Select a device on the source list: USB, Local Storage, MicroSD, etc. Use the directional buttons to select the desired file. Then press '''OK''' on the remote control to open the selected file.
# Press the '''Return''' button to go to a previous a level.
::'''NOTE:''' Press the '''Home''' button on the remote control to return to the '''Home Screen''' at anytime.

===How to Edit a File===
<div class="res-img">[[File:X10_File_Management_Edit.png|500px]]</div>
# While in '''File Management''', press and hold the '''OK''' button for three (3) seconds.
# A check box will appear at the front of each file. Use the directional buttons and press '''OK''' to select one or more files.
# By pressing the '''Right''' button, Copy, Paste, Cut, Delete, Select All, and Return boxes will be available for use.
# Select your desired action and press '''OK''' to execute.
# If you are Copying or Cutting, select your destination folder to complete the process.

====How to Use Control Bar Buttons====
The Control Bar buttons will appear on screen if a video, music, or photo file are selected to be opened.
<div class="res-img">[[File:X10_Control_Bar.png|400px]]</div>

'''Tips for using USB'''<br />
When using USB for reading and/or storage please keep in mind the following:
# Some USB storage devices may not be compatible.
# If you use an USB extension cable, the USB device may not recognize the USB.
# Only use USB storage devices formatted with Windows FAT32 or NTFS file system.
# Larger files will need extra time to load.
# Data on USB storage devices may be damaged or lost. Back up important files.

====Supported File Formats====
* Supported Office formats:
<div class="res-img">[[File:X10_Office_Files.png|500px]]</div>

* Supported Multimedia formats:
<div class="res-img">[[File:X10_Media_Files.png|500px]]</div>

==Setting==
Under '''Setting''' you can adjust Network, Basic, and Advanced Settings, Date & Time, Firmware Update, and view Information.

===Network Settings===
<gallery widths=300px heights=300px mode="nolines">
X10_Settings.png| Step 1 - Select Network Settings
M2_WiFi_Connection_2.jpg| Step 2 - Choose an option
</gallery>
# Select: '''Home''' > '''Setting''' > '''Network Settings'''.
# View and adjust your Wi-Fi and network settings.

===Basic Settings===
<gallery widths=300px heights=300px mode="nolines">
X10_Basic_Settings.png| Step 1 - Select Basic Settings
M2_Basic_Settings_1.jpg| Step 2 - Choose an option
</gallery>
# Select: '''Home''' > '''Setting''' > '''Basic Settings'''.
# Use the '''Up''' and '''Down''' buttons to select the desired option and press '''OK'''. Then use the '''Left''' and '''Right''' buttons to make adjustments or selections.
# To return to a previous menu press the '''Return''' button.

===Date & Time===
Adjust Date, Time, Time Zone, and Time Format.
:'''NOTE:''' The time is displayed in the top-right corner after connecting to the Internet.
<gallery widths=300px heights=300px mode="nolines">
X10_Date_Time.png| Step 1 - Select Date & Time
X10_Date_Time_1.png| Step 2 - Choose an option
</gallery>
# Select: '''Home''' > '''Setting''' > '''Date & Time'''.
# Use the '''Up''' and '''Down''' buttons to select the desired option and press '''OK'''. Then use the '''Left''' and '''Right''' buttons to make adjustments or selections.

===Firmware Upgrade===
Users can update the firmware by internet or USB, and check the version number.
:'''NOTE:''' Do not unplug the power cord, USB, or disconnect from the Internet during the upgrading process.
<gallery widths=300px heights=300px mode="nolines">
X10_Firmware_1.png| Step 1 - Select Firmware Upgrade
M2_Firmware_Update.jpg| Step 2 - Choose an option
</gallery>
# Before entering the '''Firmware Upgrade''' menu, ensure the projector is connected to the Internet.
# To enter the menu, select: '''Home''' > '''Setting''' > '''Firmware Upgrade'''.

'''Firmware Update Online'''
# Go to: '''Home''' > '''Setting''' > '''Firmware Upgrade''' > '''Software Update Online.'''
# Select '''Enter''' by pressing '''OK''' on the remote control.
# The system will check the ViewSonic website (OTA) and display the below dialog message if there is new Firmware.
# After selecting '''Yes''', a progress bar will appear as the update process begins.
# After reaching 100% the projector will restart. The whole process will take about 10 minutes.
# After updating the Firmware, it will take a few minutes to restart the projector.

'''Firmware Update by USB'''
# Download the latest version from the ViewSonic website and copy the file to a USB device.
# Plug the USB into the projector, then go to: '''Home''' > '''Setting''' > '''Firmware Upgrade''' > '''Software Update By USB'''.
# Select '''Enter''' by pressing '''OK''' on the remote control.
# The system will detect the Firmware version and display a dialog message.
# After selecting '''Yes''', a progress bar will appear as the update process begins.
# After reaching 100% the projector will restart. The whole process will take about 10 minutes.
# After updating the Firmware, it will take a few minutes to restart the projector.

===Advanced Settings===
<gallery widths=300px heights=300px mode="nolines">
X10_Advanced_Settings_1.png| Step 1 - Select Advanced Settings
M2_Advanced_Settings_1.jpg| Step 2 - Choose an option
</gallery>
# Select: '''Home''' > '''Setting''' > '''Advanced Settings'''.
# Use the '''Up''' and '''Down''' buttons to select the desired option and press '''OK'''. Then use the '''Left''' and '''Right''' buttons to make adjustments or selections.
# To return to a previous menu press the '''Return''' button.

===Information===
:'''NOTE:''' Press the '''Home''' button on the remote control to return to the '''Home Screen''' at anytime.
<gallery widths=300px heights=300px mode="nolines">
X10_Information_1.png| Step 1 - Select Information
M2_Information_1.jpg| Step 2 - View the information
</gallery>
# Select: '''Home''' > '''Setting''' > '''Information'''.
# View system status and information.
<noinclude>

==Screen Mirroring==
<i>Please see</i> <big>[[Wireless_Screen_Mirroring| Wireless Screen Mirroring]]</big>
</noinclude>
==Adding Apps==
Add your favorite Apps to the '''Home Screen'''.
<gallery widths=300px heights=300px mode="nolines">
File:X10_Add_App.png| Step 1 - Select Add App
File:X10_Add_App_1.png| Step 2 - Navigate the Apps
</gallery>
# From the '''Home Screen''', select '''Add App''' and then press '''OK''' on the remote control.
# Use the directional buttons to select the desired App and press '''OK'''.
# Now your favorite App will appear on the '''Home Screen'''.

===Delete Apps from the Home Screen===
# From the '''Home Screen''', select the App you want to delete and press and hold '''OK''' for three (3) seconds.
# The message, “Do you want to Delete this application from My Favorites?” will appear.
# Select '''Yes''', and press '''OK''' to delete the App.

[[Category:M2]]
[[Category:M Series]]