View source for LS740W Using the Projector

<noinclude>
{{Sticky_Menu_Projector
|1=LS740W_Introduction
|2=LS740W_Remote_Control
|3=LS740W_Initial_Setup
|4=LS740W_Connecting_Power_and_Devices
|5=LS740W_Using_the_Projector
|6=LS740W_Operation
|7=LS740W_On-Screen_Display_Menu_Tree
|8=LS740W_On-Screen_Display_Menu_Options
|9=LS740W_Specifications
|10=LS740W_Regulatory_and_Service_Information
}}
</noinclude>
=Starting the Projector=
{{Two_Columns
|1=
<ol><li>Ensure the projector’s power cord is properly connected to a power outlet.</li>
<li>Press the '''Power''' button on the projector or remote control to turn on the projector.</li>
:'''NOTE:'''
:* The Power Indicator Light will be flashing blue during startup.
:* The first time the projector is turned on, you will be prompted to select the preferred language, projection orientation, and other settings.
</ol>
|2=LS740HD_Power_On.png
}}

=Selecting an Input Source=
The projector can be connected to multiple devices at the same time. However, it can only display one full screen at a time.

<div class="res-img">[[File:LS740HD_Input_Source.png|400px]]</div>

When '''Auto Source''' is On, the projector will automatically search for input sources. If multiple sources are connected, press the Source button on the projector or remote control to select the desired input.
:'''NOTE:''' Ensure the connected sources are also turned on.

=Adjusting the Projected Image=
==Adjusting the Projector’s Height and Projection Angle==
The projector is equipped with three (3) adjustment feet. Adjusting the feet will change the projector’s height and the vertical projection angle.
<div class="res-img">[[File:LS740HD_Height_Adjust.png|400px]]</div>

==Adjusting the Focus, Keystone, and Zoom==
You can improve and adjust the clarity and position of the image by adjusting the '''Focus Ring''', '''Keystone Keys''', or '''Zoom Ring'''.
<div class="res-img">[[File:LS740HD_Clarity_Adjust.png|400px]]</div>

=Shutting Down the Projector=
<ol><li>Press the '''Power''' button on the projector or remote control and a “power off message” will appear.</li>
<li>Press the '''Power''' button again to confirm and shut down the projector.</li>
<li>The Power Indicator Light will turn solid red and enter standby mode.</li></ol>


{{#seo:
|title=ViewSonic Projector
|title_mode=append
|keywords=LS740W, connecting to power, external devices, audio, USB, networks
|description=Using the LS740W projector.
}}

[[Category:LS Series]]
[[Category:LS740W]]