View source for LDP135-151 Dual-Screen Splicing

<noinclude>  
{{Sticky_Menu_LDP135-151
|1=LDP135-151_Introduction
|2=LDP135-151_Remote_Control
|3=LDP135-151_Wall_Installation
|4=LDP135-151_Floor_Stand_Installation
|5=LDP135-151_Detachable_System_Control_Box
|6=LDP135-151_Dual-Screen_Splicing
|7=LDP135-151_Portrait_Mode
|8=LDP135-151_Connecting_Devices
|9=LDP135-151_Using_the_Display
|10=LDP135-151_On-Screen_Display_Menu
|11=LDP135-151_Embedded_Applications
|12=LDP135-151_RS-232_Protocol
|13=LDP135-151_Specifications
|14=LDP135-151_Regulatory_and_Service_Information
}}  
{{Top}}  __TOC__ </noinclude>   
=Dual-Screen Splicing=
Two (2) DirectView LED Displays can be installed together to create one (1) large display.
{| style="text-align:center;"
|-
| <div class="res-img">[[File:LDP135-151_DSS_1.png]]</div> 
|- style="font-weight:bold;"
| Standard Installation
|-
| <div class="res-img">[[File:LDP135-151_DSS_2.png]]</div>
|- style="font-weight:bold;"
| Hidden System Control Box Installation
|}
:'''NOTE:''' The ''System Control Boxes'' can be installed under the ''Cabinets'' (standard installation) for front access, or behind the ''Cabinets''.

==Wall Mounting==
===Installing the Upper and Lower Wall Mount Brackets===
:<div class="res-img">[[File:LDP135-151_DSCB_Wall_Mount_1.png|500px]]</div>
<ol><li>Ensure the wall area and size is an appropriate installation site.</li>
:'''NOTE:''' The height of the Upper ''Wall Mount Brackets'' must not be less than 90 ³⁵/₆₄" (2300 mm) from the ground.
<li>Using the ''Wall Mount Bracket'' (pictured above) as a guide, mark at least eight (8) holes and pre-drill them.</li>
<li>Install the first Upper ''Wall Mount Bracket'' with the provided screws (M6x50mm Expansion for masonry; TA6x30mm for load bearing wood).</li>
<li>Repeat '''Step 2''', ensuring the second Upper ''Wall Mount Bracket'' is level with the first upper bracket. Keep a 3 ¹¹/₃₂" (85 mm) space between the two brackets.</li>
<div class="res-img">[[File:LDP135-151_DSCB_Wall_Mount_2.png|400px]]</div>
<li>Install the Lower ''Wall Mount Brackets'' in the same manner as the Upper ''Wall Mount Brackets''. The distance between the Upper and Lower ''Wall Mount Brackets'' is 53 ⁵/₃₂" (1350 mm).</li>
:'''NOTE:''' You can also install the Upper ''Wall Mount Brackets'', hang the screen, and then install the Lower ''Wall Mount Brackets'' for a more precise fit.
<div class="res-img">[[File:LDP135-151_DSCB_Wall_Mount_3.png|300px]]</div>
{{Note-yellow|Ensure the wall can safely support 297.62 lbs. (135 kg).}}
{{Note-yellow|Ensure the deviation of the wall surface is < ¹³/₆₄" (< 5 mm).}}
<li>Repeat '''Steps 1~5''' for the second display. Keep a 2 ⁵⁵/₆₄" (72.8 mm) space between the first and second display's ''Wall Mount Brackets''.</li>
<li>After installing both Upper and Lower ''Wall Mount Brackets'' of both displays, the installation wall should look like:</li>
<div class="res-img">[[File:LDP135-151_DSS_Wall_Mount_1.png|1000px]]</div>
</ol>

===Installing the Cabinets===
<ol><li>Ensure the ''Mounting Brackets'' on the rear of the five (5) Middle ''Cabinets'' are positioned at the top and bottom mounting positions as shown below:</li>
<div class="res-img">[[File:LDP135-151_DSCB_Install_Cabinet_1.png|400px]]</div>
<li>Carefully lift each ''Cabinet'' up onto the Upper ''Wall Mount Brackets'', starting from the left.</li>
<div class="res-img">[[File:LDP135-151_DSCB_Install_Cabinet_2.png|400px]]</div>
<li>Ensure the ''Mounting Brackets'' sit securely on the ''Wall Mount Brackets'' as shown below.</li>
<div class="res-img">[[File:LDP135-151_DSCB_Install_Cabinet_3.png|400px]]</div>
<li>Push each ''Locking Bolt'' and lock each ''Hook'' with the hex tool to securely connect each cabinet together. It may be necessary to align the hole with an Allen wrench in order to engage the ''Locking Bolt''.</li>
:'''NOTE:''' There are five (5) ''Locking Bolts'' and 10 ''Hooks'' between each ''Cabinet''.
<div class="res-img">[[File:LDP135-151_DSCB_Install_Cabinet_4.png|400px]]</div>
<li>Place the remaining ''Cabinets'' up onto the Upper ''Wall Mount Brackets''. Install from left to right, ensuring the ''Mounting Brackets'' sit securely on the ''Wall Mount Brackets''.</li>
<li>Repeat '''Step 4''', securing the ''Cabinets'' together with each ''Locking Bolt'' and ''Hook''.</li>
:'''NOTE:''' There are five (5) ''Locking Bolts'' and 10 ''Hooks'' between each ''Cabinet''.
<div class="res-img">[[File:LDP135-151_DSCB_Install_Cabinet_5.png|400px]]</div>
<li>Repeat '''Steps 1~6''' for the second display.</li>
<li>After installing the Cabinets of both displays, the installation wall should look like:</li>
<div class="res-img">[[File:LDP135-151_DSS_Install_Cabinet_1.png|1000px]]</div>
</ol>

===Connecting the System Control Box (Standard Installation)===
<ol><li>Carefully unfold the ''System Control Box'' panel. Ensure the main system control board is on the right.</li>
:'''NOTE:''' Use caution as the ''System Control Box'' panel is separated into two pieces with wires attached.
<li>Starting from the left side, align the holes of the ''Cabinet'' with the ''System Control Box'' to attach.</li>
<div class="res-img">[[File:LDP135-151_DSS_SCB_Install_Standard_1.png|500px]]</div>
<li>You can also reroute the power cable for cable management. Loosen the two (2) PWM 4x6mm screws, pull the power cable out, thread the power cable through the hole and then fasten the screws tightly.</li>
<div class="res-img">[[File:LDP135-151_DSS_SCB_Install_Standard_2.png|500px]]</div>
{{Note-yellow|Professional installation only.}}
<li>Further secure the ''System Control Box'' to the ''Cabinets'' with the 20 provided M6x10mm screws.</li>
<div class="res-img">[[File:LDP135-151_DSS_SCB_Install_Standard_3.png|400px]]</div>
<li>Connect the Network and Power cables of the ''Cabinets'' to the ''System Control Box''.</li>
:'''NOTE:''' There are five (5) Network and five (5) Power cables to connect.
<div class="res-img">[[File:LDP135-151_DSS_SCB_Install_Standard_4.png|500px]]</div>
<li>Repeat '''Steps 1~5''' for the second display.</li>
<li>After installing the System Control Box of both displays, the installation wall should look like:</li>
<div class="res-img">[[File:LDP135-151_DSS_SCB_Install_Standard_5.png|600px]]</div>
<li>Connect one end of an HDMI cable to the '''HDMI OUT''' port of Display 2. Then, connect the other end of the cable to the '''HDMI IN''' port of Display 1.</li>
<div class="res-img">[[File:LDP135-151_DSS_SCB_Install_Standard_6.png|800px]]</div>
:'''NOTE:''' Route the HDMI cable as shown below:
<div class="res-img">[[File:LDP135-151_DSS_SCB_Install_Standard_7.png|400px]]</div>
<li>Install the ''System Control Box Covers'' with the KM3x6mm screws from left to right (i.e., Display 1 left cover, Display 1 middle cover, Display 1 right cover, Display 2 left cover, etc.).</li>
:'''NOTE:''' See [[LDP135-151_Wall_Installation#Installing_System_Control_Box_Covers|Installing System Control Box Covers]] for more information.</ol>

===Connecting the System Control Box (Hidden Installation)===
<ol><li>Connect one end of an HDMI cable to the '''HDMI OUT''' port of Display 2. Then, connect the other end of the cable to the '''HDMI IN''' port of Display 1.</li>
<div class="res-img">[[File:LDP135-151_DSS_SCB_Install_Standard_6.png|800px]]</div>
:'''NOTE:''' Route the HDMI cable as shown below:
<div class="res-img">[[File:LDP135-151_DSS_SCB_Install_Standard_7.png|400px]]</div>
<li>Carefully unfold the System Control Box panel. Ensure the main system control board is on the right.</li>
:'''NOTE:''' Use caution as the System Control Box panel is separated into two pieces with wires attached.
<li>Install the left part of ''System Control Box'' using the M6x16mm screws behind the ''Cabinet''.</li>
:<div class="res-img">[[File:LDP135-151_DSCB_Install_1.png|400px]]</div>
<li>Install the right part of the ''System Control Box'' using the M6x16mm screws behind the ''Cabinet''.</li>
:<div class="res-img">[[File:LDP135-151_DSCB_Install_2.png|400px]]</div>
<li>Connect the Network and Power cables of the ''Cabinets'' to the ''System Control Box''.</li>
:'''NOTE:''' There are five (5) Network and five (5) Power cables to connect.
* Route the Power cable through the opening provided in the ''Cabinet'' and connect it to the power plug.
:<div class="res-img">[[File:LDP135-151_DSCB_Net_Power_1.png]]</div>
* Route the Network cable through the opening provided in the ''Cabinet'' into an “S-shape" and connect it to the network port.
:<div class="res-img">[[File:LDP135-151_DSCB_Net_Power_2.png|400px]]</div>
<li>Repeat '''Steps 1~4''' for the second display.</li>
<li>Install the bezels from the bottom of the screen and use the M6x10mm screws to secure it to the ''Cabinet''.</li></ol>

===Installing the LED Modules===
{{Note-yellow|Please wear Anti-Static Gloves before handling the LED modules.}}
<ol><li>Starting with Display 1, install each ''LED Module'' onto the ''Cabinets'', being sure to match the corresponding numbers on the ''Module'' to the ''Cabinet''.</li>
<div class="res-img">[[File:LDP135-151_DSCB_Install_LED_Modules_1.png|500px]]</div>
<li>Ensure each ''Module'' is flush and that there is little to no gap between each. It may be necessary to gently tap the module to make it flush.</li>
<div class="res-img">[[File:LDP135-151_DSCB_Install_LED_Modules_2.png|500px]]</div>
<li>Once Display 1 is complete, repeat '''Steps 1~2''' for Display 2.</li>
<li>After installing the ''LED Modules'' of both displays, the installation wall should look like:</li>
{| style="text-align:center;"
|-
| <div class="res-img">[[File:LDP135-151_DSS_1.png]]</div> 
|- style="font-weight:bold;"
| Standard Installation
|-
| <div class="res-img">[[File:LDP135-151_DSS_2.png]]</div>
|- style="font-weight:bold;"
| Hidden System Control Box Installation
|}
</ol>




{{#seo:
|title=ViewSonic Direct View LED Display
|title_mode=append
|keywords=LDP135-151, Direct View LED, Installation, screen splicing, how to, install, dual screen
|description=How to install two LDP135-151 displays in a dual-screen splicing arrangement.
}}

[[Category:LDP135-151]]