View source for LDM136-151 Floor Stand Installation

<noinclude>
<div class="noprint">
<div style="top:1px;width:auto;" class="nomobile">
<div class="grid-container">
  <div class="item1" style="text-align:center; font-size:16; background-color:#DB0025; font-weight:bold; color:#ffffff;">{{PAGENAME}}</div>
  <div class="grid-item">[[LDM136-151_Introduction|Introduction]] </div>
  <div class="grid-item">[[LDM136-151_Remote_Control|Remote Control]] </div>
  <div class="grid-item">[[LDM136-151_Wall_Installation|Wall Installation]]</div>
  <div class="grid-item">[[LDM136-151_Floor_Stand_Installation|Floor Stand Installation]]</div>  
  <div class="grid-item">[[LDM136-151_Connecting_Devices|Connecting Devices]]</div>
  <div class="grid-item">[[LDM136-151_Using_the_Display|Using the Display]]</div>
  <div class="grid-item">[[LDM136-151_On-Screen_Display_Menu|On-Screen Display Menu]]</div>
  <div class="grid-item">[[LDM136-151_Pre-installed_Applications|Pre-installed Applications]]</div>
  <div class="grid-item">[[LDM136-151_Specifications|Specifications]]</div>
  <div class="grid-item">[[LDM136-151_Regulatory_and_Service_Information|Regulatory and Service Information]]</div>
  <div class="grid-item"><span class="newwin">[[LDM_RS-232_Protocol|'''RS-232 Protocol''']]</span></div>
  <div class="grid-item"><span class="newwin">[[Direct_View_LED_Display_Safety_Precautions|'''Safety Precautions''']]</span></div>
  <div class="grid-item"><span class="newwin">[[Direct_View_LED_Display_Troubleshooting|'''Troubleshooting''']]</span></div>
  <div class="grid-item"><span class="newwin">[[Direct_View_LED_Display_General_Maintenance|'''Maintenance''']]</span></div>
  <div class="grid-item"><span class="newwin">[[Maintenance_Tools|'''Maintenance Tools''']]</span></div>
</div>
</div>
</div>
{{Top}} </noinclude>
=Flood Stand Installation (Optional)=
<p>The floor stand (trolley) is an optional accessory. Follow below instructions to build and install your LED Display onto the trolley.</p>
{{Note|The trolley is compatible only with ViewSonic Direct View LDM136-151 and LDM163-182. Using the trolley with other models may cause instability and injury.}}

==Before Building==
<p><i class='fas fa-exclamation-circle' style='font-size:24px'></i>&nbsp; DO NOT move the trolley over cords or uneven, dirty, soft, or high incline surfaces.</p>
<p><i class='fas fa-exclamation-circle' style='font-size:24px'></i>&nbsp; To avoid injury, KEEP AWAY from moving parts.</p>
<p><i class='fas fa-exclamation-circle' style='font-size:24px'></i>&nbsp; DO NOT move the trolley by pushing on the LED Display.</p>
<p><i class='fas fa-exclamation-circle' style='font-size:24px'></i>&nbsp; DO NOT push the trolley from the front of the LED Display or attempt to lift it.</p>
<p><i class='fas fa-exclamation-circle' style='font-size:24px'></i>&nbsp; Wear protective gear, such as gloves and protective shoes, when handling the LED Display.</p>
<div class="res-img">[[File:LDM136-151 Warning-4.png |500px|alt=Push from behind]]</div> 

==Overview==
===Component List===
<gallery>
LDM163-182 Supports Trolley.svg | <div style="font-style:normal; text-align:center;">Left and Right Supports</div>
LDM163-182 Cross Beams Trolley.svg | <div style="font-style:normal; text-align:center;"> Top & Bottom Cross Beams</div>
LDM136-151 Upper Wall Mount Bracket.png | <div style="font-style:normal; text-align:center;">Upper Wall Mount Brackets<ref>You do not need the Lower Wall Mount Brackets for this mounting system.</ref></div>
LDM163-182 Cabinet Brackets Trolley.svg | <div style="font-style:normal; text-align:center;">Cabinet Brackets</div>
LDM163-182 Nuts Bolts Trolley.svg | <div style="font-style:normal; text-align:center;">Nuts and Bolts</div>
</gallery>

====Notes====
<references/>

===Trolley Dimensions===
<br>
<div class="res-img">[[File:LDM136-151 Trolley Dimensions.png |700px|alt=Trolly Dimensions]]</div> 

==Building the Trolley==
<ol>
  <li>
    <p>Install the Top and Bottom Cross Beams to the Left and Right Supports. Secure them together with the provided screws (M8 x 20 mm).
    </p>
<gallery mode="packed" heights="350px" style="text-align:left">
LDM163-182 Build Trolley-1.png |<div style="text-align:center;">Building the Trolley (Rear View)</div>
</gallery>
  </li>

  <li>
    <p>Connect the left and right Upper Wall Mount Brackets using the Wall Mount Connector Plate with the six provided screws (PM6 x 10 mm).
    </p>
    <div class="res-img">[[File:LDM136-151 Install Connector Plate Standard.png |300px|alt=Installing the Wall Mount Connector Plate]]</div> 
  </li>

  <li>
    <p>Install the Upper Wall Mount Brackets to the Top Cross Beam with the provided screws (M8 x 80 mm), lock washers, and nuts.
    </p>
    <div class="res-img">[[File:LDM136-151 Build Trolley-3.png |400px|alt=Upper Wall Mount Bracker to the Top Cross Beam of the semi-finished Trolley]]</div> 
  </li>

  <li>
    <p>Install the Cabinet Brackets to the lower side of the Left and Right Supports with the provided screws and nuts. The Cabinet Brackets are used later for further securing the lower part of the Cabinets to the trolley.
    </p>
    {{Note|There are two Cabinet Brackets to install.}}
    <div class="res-img">[[File:LDM136-151 Build Trolley-4.png|400px|alt=Cabinet Brackets onto the Trolley]]</div> 
  </li>

  <li>
    <p>Ensure all parts are accurately and securely held together, as shown in the diagrams below.
    </p>
    <div class="res-img">[[File:LDM136-151 Build Trolley-5.png |400px|alt=The assembled Trolly]]</div> 
  </li>

</ol>

==Installing the Cabinets==
<ol>

  <li>
    <p>Carefully lift Cabinet "C" onto the center of the Upper Wall Mount Brackets.</p>
    <div class="res-img">[[File:LDM136-151 Installing Cabinets-1.png|400px|alt=Installing the first Cabinet]]</div> 
{{Note|
:*One Cabinet weighs around 31 kg (68.34 lb). 
:*You can identify Cabinet sections by the labels on the package.
:*The arrow marks on each Cabinet section should be pointing up.[[File:LDM163-182 One Cabinet.png|250px|center|alt=One Cabinet block]]}}
  </li>

  <li>
    <p>Ensure the Mounting Brackets sit securely on the Wall Mount Brackets as shown below.</p>
    <div class="res-img">[[File:LDM231-251 Installing Cabinets-4.png|300px|alt=Mounting Brackets of the Cabinets securely on the Wall Mount Brackets]]</div>      
  </li>

  <li>
    <p>Lift Cabinet "B" and install it on the left side of Cabinets "C". Install the two Cabinets together with the provided screws (M8 x 20 mm).</p>  
    <div class="res-img">[[File:LDM136-151 Installing Cabinets-3-1.png|450px|alt=Installing the second Cabinet]]</div> 
{{Note|There are ten screws between each Cabinet.[[File:LDM136-151 Installing Cabinets-3-2.png|250px|center|alt=Installing two Cabinets together]]}}
  </li>

  <li>
    <p>Check for unevenness of the Cabinets by rubbing the cross section between each Cabinet. If the cross section is not aligned, loosen the M8 screws slightly and tap the Cabinets until the cross section is flat.</p>
    <div class="res-img">[[File:LDM231-251 Installing Cabinets-7.png|300px|alt=the cross sections between each Cabinet]]</div>      
  </li>
  
  <li>
    <p>Place the remaining Cabinets onto the Wall Mount Brackets. Install from the center to the right and left sides of the Wall Mount Brackets.</p>
{{Note|The installation sequence by Cabinet: C ➜ B ➜ D ➜ A ➜ E}}    
    <div class="res-img">[[File:LDM136-151 Installing Cabinets-5.png|500px|alt=after installing all Cabinets]]</div>  
  </li>

  <li>
    <p>Adjust the left Cabinet Bracket until it is aligned with the hole provided in the Cabinet.</p>
    <div class="res-img">[[File:LDM136-151 Install Cabinet Trolley-2.png|300px|alt=Cabinet Brackets swinging inward]]</div>     
  </li>

  <li>
    <p>Secure the left Cabinet Bracket to the Cabinet with the provided screw (M8 x 20 mm).</p>
    <div class="res-img">[[File:LDM136-151 Install Cabinet Trolley-3.png|300px|alt=Securing Cabinet Brackets to the Cabinets]]</div>     
  </li>

  <li>
    <p>Install the right Cabinet Bracket in the same manner as the left Cabinet Bracket.</p>  
  </li>

    <li>
    <p>After all Cabinets are installed, the rear review of the trolley should look like:</p>
    {{Note|When you use the trolley for your LED Display, the System Control Box can only be installed under the Cabinets (Standard Installation). Hidden and Separate Installation are not applicable to the trolley.}}
    <div class="res-img">[[File:LDM136-151 Install Cabinet Trolley-5.png|500px|alt=Trolley after all Cabinets]]</div>    
  </li>

</ol>

==Connecting the System Control Box==
The left and right sides of the System Control Box are pre-installed with its Covers in the factory. The main system control board is on the right.

:<div class="note-yellow" style="
background-color: #ffff99;
border: solid 1px #ffff88;
border-radius: 3px;
border-left:solid 8px #fed141;
padding:8px;
width:auto;
max-width:70%;
"><p><i class='fas fa-exclamation-circle' style='font-size:24px'></i>&nbsp; The safety wires are used to prevent the Right Cover from falling when accessing the System Control Box. Please ensure that the safety wires are never removed.</p><p><i class='fas fa-exclamation-circle' style='font-size:24px'></i>&nbsp; Use caution as the System Control Box panel is separated into two pieces with 

<div class="res-img">[[File:LDM231-251 SCB Overview.png|600px|alt=System Control Box Overview]]</div>

<ol>
  <li>
    <p>Carefully place the System Control Box on stable furniture that can safely support the System Control Box.</p>
  </li>

  <li>
    <p>To open the Right Cover, slowly bring the supplied System Control Box Maintenance Tool near the surface of the Right Cover where the steel plate is located. Then, the Right Cover should detach from the System Control Box magnetically.</p>

:<div class="note-yellow" style="
background-color: #ffff99;
border: solid 1px #ffff88;
border-radius: 3px;
border-left:solid 8px #fed141;
padding:8px;
width:auto;
max-width:70%;
"><p><i class='fas fa-exclamation-circle' style='font-size:24px'></i>&nbsp; DO NOT try to remove or disconnect the safety wires. Please ensure that the safety wires are never removed.</p></div>
    <div class="res-img">[[File:LDM231-251 Connecting SCB-2.png |450px|alt=Removing the Right System Control Box Cover]]</div>
  </li>

  <li>
    <p>Remove the Left Cover by gripping the top edge of the Cover and pulling it toward you. The Left Cover should simply lift away.</p>
    <div class="res-img">[[File:LDM231-251 Connecting SCB-3.png |450px|alt=Removing the Left System Control Box Cover]]</div>  
  </li>
  
  <li>
    <p>Secure the System Control Box panel with the Connector Plate using the provided screws (M3 x 6 mm).</p>
    <div class="res-img">[[File:LDM231-251 Connecting SCB-4.png |450px|alt=Installing the Connector Plate to the Control Box]]</div>  
  </li>

  <li>
    <p>Further secure the Connector Plate with the two provided screws (M3 x 5 mm).</p>
    <div class="res-img">[[File:LDM231-251 Connecting SCB-5.png |450px|alt=Further securing the Connector Plate]]</div>  
  </li>
  
  <li>
    <p>Align the holes of the Cabinets with the System Control Box to attach.</p>  
  </li>

  <li>
    <p>Carefully route the Network and Power Cables through the holes in each Cabinet.</p>
    <div class="res-img">[[File:LDM163-182 Connecting SCB-7.png |300px|alt=Routing the Network and Power Cables]]</div>  
  </li>
  
  <li>
    <p>Install the System Control Box to the bottom of the Cabinets with the provided screws (M8 x 20 mm).</p>
  {{Note|There are ten threaded holes between the Cabinets and the System Control Box.}}
    <div class="res-img">[[File:LDM136-151 Connecting SCB-8.png |500px|alt=Installing SCB]]</div>  
  </li>

  <li>
    <p>Connect the Power and Network Cables from the System Control Box to each Cabinet. Ensure to match the corresponding letters on the Cables to the Cabinets (A to A, B to B, C to C, and so on).</p>
{{Note|
:* Each Cabinet has one Power and one Network Cable to connect.
:* Only the Cables at the lowest row of the Cabinets need to be connected.
}}
    <div class="res-img">[[File:LDM136-151 Connecting SCB-9.png |600px|alt=Connecting the Power and Network Cables between Cabinets]]</div>
  </li>

  <li>
    <p>Connect the left system control board to the main system control board.</p>
    <div class="res-img">[[File:LDM163-182 Connecting SCB-10.png |600px|alt=The two AC units]]</div>  
  </li>

  <li>
    <p>Connect the LED Display's left speaker to the Audio Out port of the system control board.</p>
    <div class="res-img">[[File:LDM136-151 Connecting SCB-11.png |600px|alt=Left speaker]]</div>
{{Note|Ensure that the right speaker is properly connected to the other Audio Out port. See [[LDM136-151_Introduction#Product Overview|the Introduction section]] for the position of the LED Display's left and right speakers. [[File:LDM231-251 Connecting Audio.png |250px|center|alt=Audio Out ports]]}}  
  </li>

  <li>
    <p>Ensure the AC unit of the System Control Box is properly connected.</p>

:<div class="note-yellow" style="
background-color: #ffff99;
border: solid 1px #ffff88;
border-radius: 3px;
border-left:solid 8px #fed141;
padding:8px;
width:auto;
max-width:70%;
"><p><i class='fas fa-exclamation-circle' style='font-size:24px'></i>&nbsp; DO NOT connect the System Control Box Power Cables at this time.</p></div>
<div class="res-img">[[File:LDM136-151 Connecting SCB-12-1.png |600px|alt=System Control Box Power Cables]]</div>

    <ul>
      <li>The neutral wires (usually white/blue) are connected to the "N1", "N2", and "N" terminals.</li>
      <li>The hot wires (usually black/brown) are connected to the "L1", "L2", and "L" terminals.</li>
      <li>The input and output terminals are properly grounded (3 x AC OUT and 2 x AC IN, usually in green).</li>

:<div class="note-yellow" style=" background-color: #ffff99; border: solid 1px #ffff88; border-radius: 3px; border-left:solid 8px #fed141; padding:8px; width:auto; max-width:70%; "><p><i class='fas fa-exclamation-circle' style='font-size:24px'></i>&nbsp; The meaning of wiring color may vary by country.</p></div>
    
    <div class="res-img">[[File:LDM136-151 Connecting SCB-12-2.png |500px|alt=AC units]]</div>  
    
    </ul>    
  </li>

  <li>
    <p>After connecting all Cables and wires, hold the top edge of the Right Cover toward the System Control Box to replace it. Once the Right Cover is replaced, it will be held in place magnetically.</p>
{{Note|Ensure the Power Button cable is connected before securing the Right Cover.}}
     <div class="res-img">[[File:LDM231-251 Connecting SCB-14.png |500px|alt=AC units]]</div>  
  </li>

  <li>
    <p>Replace the Left Cover by aligning it properly with the System Control Box; then the Left Cover should attach magnetically.</p>  
  </li> 
</ol>

==Installing the LED Modules==
:<div class="note-yellow" style="
background-color: #ffff99;
border: solid 1px #ffff88;
border-radius: 3px;
border-left:solid 8px #fed141;
padding:8px;
width:auto;
max-width:70%;
"><p><i class='fas fa-exclamation-circle' style='font-size:24px'></i>&nbsp; Please wear Anti-Static Gloves before handling the LED Modules.</p><p><i class='fas fa-exclamation-circle' style='font-size:24px'></i>&nbsp; To avoid direct contact with the LED Modules, please remove watches, rings, bracelets, or other metal objects.</p><p><i class='fas fa-exclamation-circle' style='font-size:24px'></i>&nbsp; Use caution when installing the LED Modules.</p>

<ol>
  <li>
    <p>Starting from the LED Module labeled "1" in the top left corner, align each LED Module with the Cabinet, then carefully press the Module into place.</p>
    {{Note|The arrow marks on the back of the LED Modules should be pointing up.}}
    <div class="res-img">[[File:LDM163-182_LED_Module.png|350px|alt=LDM163-182's LED Modules]]</div>

  </li>

  <li>
    <p>Attach the remaining LED Modules onto the Cabinets. Install from top left and move to bottom right, ensuring to match the corresponding numbers on the Module to the Cabinet.</p>
    <div class="res-img">[[File:LDM163-182 Installation Sequence LED Modules.png|700px|alt=Installation sequence of the LED Modules]]</div>
{{Note|Before installing the LED Module, ensure that each Module is flush and that there is little to no gap between each. It may be necessary to gently tap the module to make it flush.}}  
  </li>
</ol>

==Installing the Screen Bezels==
<p>The Screen Bezels' plastic tabs are pre-installed onto the Bezels. Ensure all plastic tabs are properly mounted before installing the Screen Bezels onto the screen.</p>

:<div class="note-yellow" style="
background-color: #ffff99;
border: solid 1px #ffff88;
border-radius: 3px;
border-left:solid 8px #fed141;
padding:8px;
width:auto;
max-width:70%;
"><p><i class='fas fa-exclamation-circle' style='font-size:24px'></i>&nbsp; The label indicates the top of each Screen Bezel. To ensure the Bezels are installed in the correct position, please use the labels on the inside of the Bezels as a guide.[[File:LDM231-251 Screen Bezels.png |300px|center|alt=LDM231-251's Screen Bezels]]</p>

<ol>
  <li>
    <p>Place the Screen Bezel to the correct side of the screen to attach. Start from the left and move to the right.</p>

{{Note|
:*Ensure the label side of the Screen Bezel is facing the screen.
:*Before installing the Screen Bezels, check the label of each Bezel as the label helps you know which side <nowiki>("L" = left side & "R" = right side)</nowiki> to attach.
:*The illustration below shows the location where each Screen Bezel should be installed.[[File:LDM163-182 Installation Sequence Screen Bezels.png|400px|center|alt=Installation sequence of the Screen Bezels]]
}}
  </li>

  <li>
    <p>Align the plastic tabs of the Screen Bezel with the holes provided in the screen.</p>
    <div class="res-img">[[File:LDM231-251 Install Screen Bezels onto the Screen.png |350px|alt=Screen Bezels clicking onto the screen]]</div>  
  </li>

  <li>
    <p>Press down on the Screen Bezel until you hear it click into place.</p>  
  </li>
  
  <li>
    <p>Place the remaining Screen Bezels onto the left and right sides of the screen.</p>  
    {{Note|There are six Screen Bezels on either left or right side of the screen to install.}}
  </li>
</ol>

==Turning On the LED Display==
<ol>
  <li>
    <p>Make sure the System Control Box Power Cables are connected and plugged into power outlets.</p>
    <div class="res-img">[[File:LDM163-182 Turn On the Display.png|500px|alt=Turning on the LED Display]]</div>
    {{Note|When the System Control Box Power Cables are connected to power outlets, the Power Indicator Light will be a steady red. This means the LED Display is in standby mode. Please refer to the User Guide for more details.}}  
  </li>
  
  <li>
    <p>Your LED Display is now ready to power on.</p>  
  </li>
</ol>


{{#seo:
|title=ViewSonic Direct View LED Display
|title_mode=append
|keywords=LDM136-151, Direct View LED, Installation, Wall, how to, install, floor stand, Trolley, Floor
|description=How to install the LDM136-151 Direct View LED display. 
}}

[[Category:LDM136-151]]