View source for VX2528J Initial Setup

<noinclude>
{{Sticky_Menu_Monitor_2.1
|1=VX2528J_Introduction
|2=VX2528J_Initial_Setup
|3=VX2528J_Connecting_Power_and_Devices
|4=VX2528J_Adjusting_the_Viewing_Angle
|5=VX2528J_Quick_Menu
|6=VX2528J_Hot_Keys
|7=VX2528J_On-Screen_Display_Menu
|8=VX2528J_On-Screen_Display_Menu_Tree
|9=VX2528J_Specifications
|10=VX2528J_Regulatory_and_Service_Information
}}
</noinclude>
=Installing the Stand=
<div class="res-img">[[File:VX2528J_Stand_Installation.png|450px]]</div>
{{Note|Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.}}

=Removing the Stand and Mounting the Display=
Refer to the table below for the standard dimensions for mounting kits.

:{{Note|For use only with a UL certified wall mount kit/bracket. To obtain a wall-mounting kit or height adjustment base, contact ViewSonic® or your local dealer.}}

{| class="wikitable" style="text-align:center; background-color:#ffffff; width:70%;"
|-
! style="background-color:#DB0025; color:#ffffff;"|Maximum<br>Loading
! style="background-color:#DB0025; color:#ffffff;"|Hole Pattern<br>(W x H)
! style="background-color:#DB0025; color:#ffffff;"|Interface Pad<br>(W x H x D)
! style="background-color:#DB0025; color:#ffffff;"|Pad Hole
! style="background-color:#DB0025; color:#ffffff;"|Screw<br>Specification
! style="background-color:#DB0025; color:#ffffff;"|Screw<br>Quantity
|-
|14 kg
|100 x 100 mm
|N/A
|Ø 5 mm
|M4 x 10 mm
|4 screws
|}

<ol>
    <li>Turn off the device and disconnect all cables.</li>
    <li>Place the device on a flat, stable surface with the screen facing down.</li>
    <li>
        <p>Remove the monitor stand.</p>
        <div class="res-img">[[File:VX2528J_Stand_Remove.png|450px]]</div>
    </li>
    <li>
        <p>Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).</p>
        <div class="res-img">[[File:VX2528J_VESA.png|400px]]</div>
    </li>
    <li>Follow the instructions that come with the mounting kit to mount the monitor.</li>
</ol>

{{Security_Slot}}


{{#seo:
|title=ViewSonic Monitor
|title_mode=append
|keywords=VX2528J, stand installation, wall mounting, VESA 
|description=How to install and uninstall the stand on the VX2528J monitor. 
}}

[[Category:VX2528J]]