View source for VA2708-HDJ Initial Setup

<noinclude>
{{Sticky_Menu_Monitor_2.1
|1=VA2708-HDJ_Introduction
|2=VA2708-HDJ_Initial_Setup
|3=VA2708-HDJ_Connecting_Power_and_Devices
|4=VA2708-HDJ_Adjusting_the_Viewing_Angle
|5=VA2708-HDJ_Quick_Menu
|6=VA2708-HDJ_Hot_Keys
|7=VA2708-HDJ_On-Screen_Display_Menu
|8=VA2708-HDJ_On-Screen_Display_Menu_Tree
|9=VA2708-HDJ_Specifications
|10=VA2708-HDJ_Regulatory_and_Service_Information
}}
</noinclude>

=Installing the Stand=
<div class="res-img">[[File:VA2708-HDJ Installing the Stand 1.png|350px|Installing the Stand]]</div>
<br />
{{Note-yellow|Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.}}

=Removing the Stand and Mounting the Display=
Refer to the table below for the standard dimensions for mounting kits.

:{{Note-yellow|For use only with a UL certified mount kit/bracket. To obtain a wall-mounting kit or height adjustment base, contact ViewSonic® or your local dealer.}}
:<div class="res-img">[[File:VA2708-HDJ Stand Removal 1.png|400px|VESA Mounting]]</div>
{| class="wikitable" style="text-align:center; background-color:#ffffff; width:auto;"
|-
! style="background-color:#DB0025; color:#ffffff;"|Maximum Loading
! style="background-color:#DB0025; color:#ffffff;"|Hole Pattern (W x H)
! style="background-color:#DB0025; color:#ffffff;"|Interface Pad (W x H x D)
! style="background-color:#DB0025; color:#ffffff;"|Pad Hole
! style="background-color:#DB0025; color:#ffffff;"|Screw Specification
! style="background-color:#DB0025; color:#ffffff;"|Screw Quantity
|-
|14 kg
|100 x 100 mm
|115 x 115 x 2.6 mm
|Ø 5 mm
|M4 x 10 mm
|4 screws
|}
:'''NOTE:''' Mounting kits are sold separately.
<ol><li>Turn off the device and disconnect all cables.</li>
<li>Place the device on a flat, stable surface with the screen facing down.</li>
<li>Remove the monitor stand.</li>
:<div class="res-img">[[File:VA2708-HDJ Stand Removal 2.png|350px|Removing the Stand]]</div>
<li>Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).</li>
<li>Follow the instructions that come with the mounting kit to mount the monitor.</li></ol>

=Using the Security Slot=
To help prevent the device from being stolen, use a security slot locking device to secure the device to a fixed object.

Additionally, fastening the monitor to a wall or fixed object using a security cable can help support the weight of the monitor in order to prevent the monitor from falling over.

Below is an example of setting up a security slot locking device on a table.

<div class="res-img">[[File:VA2756-4K-MHD_Security_Slot.png|500px|Using the Security Slot]]</div>

{{#seo:
|title=ViewSonic Monitor
|title_mode=append
|keywords=VA2708-HDJ, stand installation, wall mounting, VESA 
|description=How to install and uninstall the stand on the VA2708-HDJ monitor. 
}}

[[category:VA2708-HDJ]]