View source for VG3456a Initial Setup

<noinclude>
{{Sticky_Menu_Monitor_3.0_No_Adv
|1=VG3456a_Introduction
|2=VG3456a_Initial_Setup
|3=VG3456a_Connecting_Power_and_Devices
|4=VG3456a_Adjusting_the_Viewing_Angle
|5=VG3456a_Quick_Menu
|6=VG3456a_Hot_Keys
|7=VG3456a_On-Screen_Display_Menu
|8=VG3456a_On-Screen_Display_Menu_Tree
|9=VG3456a_On-Screen_Display_Menu_Options
|10=VG3456a_Specifications
|11=VG3456a_Regulatory_and_Service_Information
}} 
</noinclude>
=Installing the Stand=
<ol><li>Place the box on a flat, stable surface and open the front flap of the box to reveal the contents. Remove the top tray.</li>
<li>Remove the monitor stand’s base and neck. Align and connect the three (3) points on the monitor stand’s base with the monitor stand’s neck.</li>
<li>Use the captured screw in the monitor stand’s base and secure it to the monitor stand’s neck.</li>
<div class="res-img">[[File:VG3456a_Installing_the_Stand_1.png|300px|Installing the Stand]]</div>
<li>Align and slide the upper hooks of the monitor stand into the stand mounting slots as shown in the illustration below:</li>
<div class="res-img">[[File:VG3456a_Installing_the_Stand_2.png|300px|Installing the Stand]]</div>
:'''NOTE:''' Ensure the stand is secure and the quick release tab positively clicks into place.
<li>Using the stand’s handle, lift the device out of the box and into its upright position on a flat, stable surface.</li>
<div class="res-img">[[File:VG3456a_Installing_the_Stand_3.png|300px|Installing the Stand]]</div>
:'''NOTE:''' Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.</ol>

=Removing the Stand and Mounting the Display=
Refer to the table below for the standard dimensions for mounting kits.
:{{Note-yellow|For use only with a UL certified mounting kit/bracket. To obtain a wall mounting kit or height adjustment base, contact ViewSonic® or your local dealer.}}

{| class="wikitable" style="text-align:center; background-color:#ffffff; width:auto;"
|-
! style="background-color:#DB0025; color:#ffffff;"|Maximum Loading
! style="background-color:#DB0025; color:#ffffff;"|Hole Pattern (W x H)
! style="background-color:#DB0025; color:#ffffff;"|Interface Pad (W x H x D)
! style="background-color:#DB0025; color:#ffffff;"|Pad Hole
! style="background-color:#DB0025; color:#ffffff;"|Screw Specification
! style="background-color:#DB0025; color:#ffffff;"|Screw Quantity
|-
|14 kg
|100 x 100 mm
|115 x 115 x 2.6 mm
|Ø 5 mm
|M4 x 10 mm
|4 screws
|}
:'''NOTE:''' Mounting kits are sold separately.
<ol><li>Turn off the device and disconnect all cables.</li>
<li>Place the device on a flat, stable surface with the screen facing down.</li>
<li>Push and hold the quick release tab and carefully lift the stand.</li>
<div class="res-img">[[VG3456a_Stand_Remove_1.png|400px|Removing the Stand]]</div>
<li>Pull down slightly to disengage the hooks and remove the stand.</li>
<div class="res-img">[[VG3456a_Stand_Remove_2.png|400px|Removing the Stand]]</div>
<li>Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).</li>
<div class="res-img">[[VG3456a_Stand_Remove_3.png|400px|Removing the Stand]]</div>
<li>Follow the instructions that come with the mounting kit to mount the monitor.</li></ol>

=Using the Security Slot=
To help prevent the device from being stolen, use a security slot locking device to secure the device to a fixed object.

Additionally, fastening the monitor to a wall or fixed object using a security cable can help support the weight of the monitor in order to prevent the monitor from falling over.

Below is an example of setting up a security slot locking device on a table.
<div class="res-img">[[File:VG3456a_Security_Slot.png|400px|Using the Security Slot]]</div>



{{#seo:
|title=ViewSonic Monitor
|title_mode=append
|keywords=VG3456a, stand installation, mounting, VESA 
|description=How to install and uninstall the stand on the VG3456a monitor. 
}}

[[Category:VG3456a]]