View source for TD2265 Initial Setup

<noinclude>
{{Sticky_Menu_Monitor_2.1
|1=TD2265_Introduction
|2=TD2265_Initial_Setup
|3=TD2265_Connecting_Power_and_Devices
|4=TD2265_Adjusting_the_Viewing_Angle
|5=TD2265_Quick_Menu
|6=TD2265_Hot_Keys
|7=TD2265_On-Screen_Display_Menu
|8=TD2265_On-Screen_Display_Menu_Tree
|9=TD2265_Specifications
|10=TD2265_Regulatory_and_Service_Information
}}
</noinclude>
=Adjusting the Stand=
<ol><li>Place the monitor on a flat, stable surface with the screen facing down.</li>
<li>With one hand supporting the monitor, carefully pull and extend the stand.</li>
<div class="res-img">[[File:TD2265_Stand_Adjust_1.png|400px|Adjusting the Stand]]</div>
<li>Lift the device into its upright position on a flat, stable surface.</li>
<div class="res-img">[[File:TD2265_Stand_Adjust_2.png|400px|Adjusting the Stand]]</div>
:'''NOTE:''' Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.</ol>

=Installing the Stand=
<ol><li>Place the monitor on a flat, stable surface with the screen facing down.</li>
<li>Ensure the Adjustable Foot is secured against the monitor.</li>
<li>Align the mounting holes of the stand with the VESA mounting holes at the rear of the monitor.</li>
<li>Secure the stand to the monitor with the screws provided.</li>
<div class="res-img">[[File:TD2265_Stand_Install_1.png|400px|Installing the Stand]]</div>
<li>Lift the device into its upright position on a flat stable surface.</li>
<div class="res-img">[[File:TD2265_Stand_Install_2.png|350px|Installing the Stand]]</div></ol>
{{Note-yellow|Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.}}

=Wall Mounting=
Refer to the table below for the standard dimensions for wall mount kits.
:{{Note-yellow|For use only with a UL certified wall mount kit/bracket. To obtain a wall-mounting kit or height adjustment base, contact ViewSonic® or your local dealer.}}

{| class="wikitable" style="text-align: center; background-color:#ffffff;" width="auto" 
! style="background-color:#DB0025; color:#ffffff;" | Maximum Loading
! style="background-color:#DB0025; color:#ffffff;" | Hole Pattern (W x H)
! style="background-color:#DB0025; color:#ffffff;" | Interface Pad (W x H x D)
! style="background-color:#DB0025; color:#ffffff;" | Pad Hole
! style="background-color:#DB0025; color:#ffffff;" | Screw Specification
! style="background-color:#DB0025; color:#ffffff;" | Quantity
|-
|14 kg
|100 x 100 mm
|115 x 115 x 2.6 mm
|Ø 5 mm
|M4 x 10 mm
|4 screws
|}
<ol><li>Turn off the device and disconnect all cables.</li>
<li>Place the device on a flat, stable surface with the screen facing down.</li>
<li>Unscrew the attached stand and carefully remove it (if applicable).</li>
<li>Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).</li>
<div class="res-img">[[File:TD2265_Wall_Mounting.png|400px|Wall Mounting]]</div>
<li>Follow the instructions that come with the wall mounting kit to mount the monitor onto the wall.</li></ol>
{{Security_Slot}}

{{#seo:
|title=ViewSonic Touch Monitors
|title_mode=append
|keywords=TD2265, initial setup, adjusting the stand, installing stand, wall mounting
|description=The initial setup for the TD2265 monitor. 
}}

[[Category:TD2265]]