VPCF5

    From ViewSonic User Guide Database

    Print

    Product Overview

    Product Overview
    Number Item Description
    1 Antenna Wi-Fi antenna interface
    2 Status LED Status indicator light (Green)
    Mode Description
    Off Indicator light is off
    On Green indicator light is flashing
    3 Power LED Power indicator light (Red)
    Mode Description
    Off Indicator light is off
    On Red indicator light is always on
    4 Power Button Turn the slot-in PC on/off
    5 LINE-OUT Audio out for connected ear-/headphones or speakers
    6 USB Type C USB Type C input (Data only; 5V/0.9A charging)
    7 RESET Reset button
    8 Security Lock Anti-theft security lock
    9 HDMI Extend content out to another display device
    10 USB 3.1 USB 3.1 port
    11 LAN Standard RJ45 (10M/100M/1G) internet connection port
    NOTE: This network port is only used for PC.
    12 USB 2.0 USB 2.0 port

    Installing the VPCF5

    1. Remove the slot-in PC cover of the display.
    2. VPCF5 Installation
    3. Using the handle of the VPCF5, carefully insert it into the PC slot of the display.
    4. VPCF5 Installation
    5. Secure the VPCF5 to the display with the two (2) included screws.
    6. NOTE:
      • Please note that the antennas must be installed on the VPCF5.
      • Please pay attention to the installation direction of the VPCF5, with the vents facing outwards to avoid damage.
      • The VPC products do not support hot swapping. When removing or installing the device, turn off the power supply for both the display and VPC product first.

    Network Connection

    To connect to the Internet or a network, connect one end of a RJ45 cable to the LAN port of the VPCF5, then connect the other end to your network.

    Network Connection

    USB Connection

    USB peripherals such as keyboards, mice, storage devices, etc. can be connected to the VPCF5’s USB ports.

    USB Connection

    Selecting an Input Source

    IFP Series

    VPC-A31-O1 Input IFP.png

    To select an input source:

    1. Press INPUT on the remote control, press the setting button on the front panel, or press the Settings icon from the toolbar to display the Input Settings menu.
    2. Press ▼/▲/◄/► on the remote control to select the PC source.
    3. Press OK/ENTER on the remote control, or touch the input source directly.
    4. Press EPG/BACK on the remote control, or touch a blank area outside of the menu to exit.
    5. NOTE: The above image is for reference only and is subject to change without notice.

    CDE Series

    VPC-A31-O1 Input CDE.png

    To select an input source:

    1. Press INPUT on the remote control.
    2. Press ▼/▲ on the remote control to select the PC source.
    3. Press OK/ENTER on the remote control.
    4. Press EPG/BACK on the remote control to exit.
    5. NOTE: The above image is for reference only and is subject to change without notice.

    Technical Specifications

    Category Item Specifications
    I/O Ports 1 x HDMI

    1 x RJ45 (LAN)
    1 x USB 2.0 (5V/0.5A)
    2 x USB 3.1 (5V/0.9A)
    1 x USB Type C (Data only, no PD support, 5V/900mA)
    1 x Analog audio-in(3.5 mm, mic-in)

    Physical Dimensions (mm) 200 x 119 x 30 mm
    Dimensions (in.) 7.87” x 4.69” x 1.18”
    Weight (kg) 0.70 kg
    Weight (lbs.) 1.54 lbs
    Operating Conditions Temperature 0°C ~ 40°C (32°F ~ 104°F)
    Humidity 10% ~ 90% (non-condensing)
    Altitude < 5,000 m
    Storage Conditions Temperature -20°C ~ 60°C (-4°F ~ 140°F)
    Humidity 10% ~ 90% (non-condensing)
    Altitude < 5,000 m
    Power Voltage 12~19V DC
    Consumption 90W (Maximum)
    Wi-Fi Module Form Factor Wi-Fi 6 (IEEE 802.11 a/b/g/n/ac/ax Wi-Fi 2T/2R+)
    Bluetooth 5.2 (V2.1/4.2/5.2 USB2.0/3.0 Module)
    Frequency Range and Output Power (Max.)

    BT

    • 2.4 GHz~2.4835 GHz (<10dBm)

    Wi-Fi

    • 2.4 GHz~2.4835 GHz (< 20dBm)
    • 5.170 GHz~5.33 GHz (< 20dBm)
    • 5.49 GHz~5.73 GHz (< 20dBm)
    • 5.735 GHz~5.835 GHz (< 20dBm)

    Compliance Information

    This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on the unit.

    CE Conformity for European Countries

    Ce-mark.png
    The device complies with the EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU and Radio Equipment Directive 2014/53/EU.

    The following information is only for EU-member states:

    The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose of the equipment as unsorted municipal waste, but use the return and collection systems according to local law.
    WEEE Logo.gif

    The operating frequency bands and the maximum transmitted power limit are listed below:
    2412-2472MHz (Wi-Fi 2.4GHz),
    5180-5320MHz (Wi-Fi 5GHz),
    5500-5700MHz (Wi-Fi 5GHz),
    Max Output Power : under 20dBm
    These devices comply with RF specifications when the device is used at 20 cm from your body.

    Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
    La bande 5150-5250 MHz est réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage pré judiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
    Book Exclaim.png
    BE BG CZ DK DE EE IE
    EL ES FR HR IT CY LV
    LT LU HU MT NL AT PL
    PT RO SI SK FI SE NO
    IS LI CH TR UK (NI)

    Para su uso en México

    “La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada”.
    “Este equipo ha sido diseñado para operar con antenas tipo monopolo con ganancia de 5 dBi para 2.4 GHz y 5 GHz WLAN. El uso con este equipo de antenas que tengan una ganancia mayor que 5 dBi quedan prohibidas. La antena es única y la impedancia requerida es de 50 ohms”.

    Declaration of RoHS2 Compliance

    This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:

    Substance Proposed Maximum Concentration Actual Concentration
    Lead (Pb) 0.1% < 0.1%
    Mercury (Hg) 0.1% < 0.1%
    Cadmium (Cd) 0.01% < 0.01%
    Hexavalent Chromium (Cr6⁺) 0.1% < 0.1%
    Polybrominated biphenyls (PBB) 0.1% < 0.1%
    Polybrominated diphenyl ethers (PBDE) 0.1% < 0.1%
    Bis (2-ethylhexyl) phthalate (DEHP) 0.1% < 0.1%
    Butyl benzyl phthalate (BBP) 0.1% < 0.1%
    Dibutyl phthalate (DBP) 0.1% < 0.1%
    Diisobutyl phthalate (DIBP) 0.1% < 0.1%

    Certain components of products as stated above are exempted under the Annex III of the RoHS2 Directives as noted below. Examples of exempted components are:

    • Copper alloy containing up to 4% lead by weight.
    • Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
    • Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound.
    • Lead in dielectric ceramic in capacitors for a rated voltage of 125V AC or 250V DC or higher.

    Indian Restriction of Hazardous Substances

    Restriction on Hazardous Substances statement (India). This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.

    Product Disposal at End of Product Life

    ViewSonic® respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit the ViewSonic® website to learn more.

    USA & Canada
    https://www.viewsonic.com/us/go-green-with-viewsonic

    Europe
    https://www.viewsonic.com/eu/environmental-social-governance/recycle

    Taiwan
    https://recycle.moenv.gov.tw

    For EU users, please contact us for any safety/accident issue experienced with this product:

    Icon Address.svg
    ViewSonic Europe Limited
    Haaksbergweg 75
    1101 BR Amsterdam
    Netherlands
    Icon Phone.svg
    +31 (0) 650608655
    Icon Email.svg
    EPREL@viewsoniceurope.com
    Icon URL.svg
    https://www.viewsonic.com/eu/

    Copyright Information

    Copyright© ViewSonic® Corporation, 2023. All rights reserved.

    Macintosh and Power Macintosh are registered trademarks of Apple Inc.

    Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries.

    ViewSonic® and the three birds logo are registered trademarks of ViewSonic® Corporation.

    VESA is a registered trademark of the Video Electronics Standards Association. DPMS, DisplayPort, and DDC are trademarks of VESA.

    Disclaimer: ViewSonic® Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.

    In the interest of continuing product improvement, ViewSonic® Corporation reserves the right to change product specifications without notice. Information in this document may change without notice.

    No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic® Corporation.

    VPCF5_UG_ENG_1b_202312282023

    Customer Service Contact Information

    For technical support or product service, see the table below or contact your reseller.

    Note: You will need the product’s serial number, which is located on the rear of the monitor by the I/O ports.

    Asia Pacific & Africa

    Country / Region Website
    Australia https://viewsonic.com/au/
    Bangladesh https://www.viewsonic.com/bd/
    中囯(China) https://www.viewsonic.com.cn
    香港 (繁體中文) https://www.viewsonic.com/hk/
    Hong Kong (English) https://www.viewsonic.com/hk-en/
    India https://www.viewsonic.com/in/
    Indonesia https://www.viewsonic.com/id/
    Israel https://www.viewsonic.com/il/
    日本 (Japan) https://www.viewsonic.com/jp/
    Korea https://www.viewsonic.com/kr/
    Malaysia https://www.viewsonic.com/my/
    Middle East https://www.viewsonic.com/me/
    Myanmar https://www.viewsonic.com/mm/
    Nepal https://www.viewsonic.com/np/
    New Zealand https://www.viewsonic.com/nz/
    Pakistan https://www.viewsonic.com/pk/
    Philippines https://www.viewsonic.com/ph/
    Singapore https://www.viewsonic.com/sg/
    臺灣 (Taiwan) https://www.viewsonic.com/tw/
    ประเทศไทย (Thailand) https://www.viewsonic.com/th/
    Việt Nam https://www.viewsonic.com/vn/
    South Africa & Mauritius https://www.viewsonic.com/za/

    Americas

    Country / Region Website
    United States https://www.viewsonic.com/us/
    Canada https://www.viewsonic.com/us/
    Latin America https://www.viewsonic.com/la/

    Europe

    Country / Region Website
    Europe https://www.viewsonic.com/eu/
    France https://www.viewsonic.com/fr/
    Deutschland https://www.viewsonic.com/de/
    Қазақстан https://www.viewsonic.com/kz/
    Россия https://www.viewsonic.com/ru/
    España https://www.viewsonic.com/es/
    Türkiye https://www.viewsonic.com/tr/
    Україна https://www.viewsonic.com/ua/
    United Kingdom https://www.viewsonic.com/uk/